My Build: http://pcpartpicker.com/user/theswoosh/saved/2LSF
OC/voltage: http://tinypic.com/r/2agkg3a/5
the system runs Great ! but, from time to time when it sleeps, it never wakes up. at night when im about to sleep, i use my keyboard's function to sleep. then if i try to wake my PC up by taping the keyboard or moving the mouse, it will not show display.
i tried a couple of troubleshooting:
1.) i took the power off from the GPU and tried to use IGPU to run some testings. this troubleshoot went well and it showed display but i need to run it from my GPU
2.) i removed my GPU from PCIE2 x16 and put it in the PCIE4 x8, this troubleshoot also worked but since im only running a single GPU, then it is better to utilize the x16 PCIE.
i am suspecting the problem to be on the PCIE2 x16.
Finally, i tried putting it on PCIE2 x16 again, and it worked but for some reason GPU driver went missing. i suddenly got a exclamation on my device manager on my Display Adapters -> "AMD radeon R9 200 series" when i cliked properties it says " This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
{Operation Failed}
The requested operation was unsuccessful.
"
OC/voltage: http://tinypic.com/r/2agkg3a/5
the system runs Great ! but, from time to time when it sleeps, it never wakes up. at night when im about to sleep, i use my keyboard's function to sleep. then if i try to wake my PC up by taping the keyboard or moving the mouse, it will not show display.
i tried a couple of troubleshooting:
1.) i took the power off from the GPU and tried to use IGPU to run some testings. this troubleshoot went well and it showed display but i need to run it from my GPU
2.) i removed my GPU from PCIE2 x16 and put it in the PCIE4 x8, this troubleshoot also worked but since im only running a single GPU, then it is better to utilize the x16 PCIE.
i am suspecting the problem to be on the PCIE2 x16.
Finally, i tried putting it on PCIE2 x16 again, and it worked but for some reason GPU driver went missing. i suddenly got a exclamation on my device manager on my Display Adapters -> "AMD radeon R9 200 series" when i cliked properties it says " This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
{Operation Failed}
The requested operation was unsuccessful.
"