Sign in with
Sign up | Sign in
Your question

Help!! my computer turn on and imedleatly turn off, after i change bios

Last response: in CPUs
Share
November 24, 2013 6:28:59 AM

help becouse i want to change cpu heat warning, i change cpu warning into off, but after i change that, i starting power cpu, it turn on, but after 2 second it turn off imedleatly, it didnt even into display anything in my monitor,

i already unplug the battery to reset bios setting, but it didnt worked, i already unplug every componen hardware like vga, hardisk, ram, even processor, it even didnt worked, T-T

in some article to change bios setting it must plug the jumper into cmos, but i dont have jumper to reset cmos panel, but i already stick my screwdiver to absorb electricity in more than a minute it didnt worked,

and i didnt think it becouse power suply becouse before i change bios setting it fine,
a b à CPUs
November 24, 2013 6:41:58 AM

1. Why are you disabling the warning?
2. There should be a reset CMOS jumper on the board, if you move the jumper from pin 1,2 to pin 2.3 for 10 seconds then move it back like this: 1-2 3 -> 1 2-3 (10 seconds later) 1-2 3. or if it is removable remove the button battery and wait overnight for the CMOS to clear.
m
0
l
November 24, 2013 7:01:05 AM

1. before the accident i setting CPU heat warning into 60 > , when i playing game it make sound so long,, i want to turn off for a while, i dont understant the jumper pin. T-T becouse before i open the cases, and look the manuel book, where is CMOS pin, there is no jumper stick in it, and i dont have jumper , maybe i remove the battery overnight it clear cmos setting,

thank so much for attenttion, i will update
m
0
l
Related resources
a b à CPUs
November 24, 2013 7:20:47 AM

suropati said:
1. before the accident i setting CPU heat warning into 60 > , when i playing game it make sound so long,, i want to turn off for a while, i dont understant the jumper pin. T-T becouse before i open the cases, and look the manuel book, where is CMOS pin, there is no jumper stick in it, and i dont have jumper , maybe i remove the battery overnight it clear cmos setting,

thank so much for attenttion, i will update


the jumper is a piece of metal, a screwdriver would do the same job ;) 

and what CPU are you using?
m
0
l
November 25, 2013 7:55:44 AM

it didnt worked, i using gigabyte ga-h h55m s2v and there is only 2 pin in my jumper, i already put off the battery over night,

is there any solution? but i already brought the jumper, when i try stick in jumper pin, the cpu wont turn on, before that i turning on the cpu, and i stick my jumper and it imedealy shut off,
m
0
l
a b à CPUs
November 25, 2013 2:26:05 PM

suropati said:
it didnt worked, i using gigabyte ga-h h55m s2v and there is only 2 pin in my jumper, i already put off the battery over night,

is there any solution? but i already brought the jumper, when i try stick in jumper pin, the cpu wont turn on, before that i turning on the cpu, and i stick my jumper and it imedealy shut off,


can you RMA your board is is your warranty ended?
m
0
l
!