Sign in with
Sign up | Sign in
Your question

After installing Graphics card drivers monitor gives no signal

Tags:
  • Drivers
  • Computers
  • Graphics
  • Graphics Cards
  • Monitors
  • Displays
Last response: in Graphics & Displays
Share
November 24, 2013 11:43:16 AM

Specs
MOBO:Asrock Z87 extreme 4
PSU: Corsair 750 Watt
CPU: Core i7 4770
Ram: G.skill 8gb 2133mhz
GPU: MSI GTX 760

Ok, so here is my problem, i just built this computer, and it worked perfectly for about a week, then while playing battlefield 4 the graphics card crashed but recovered successfully, however about 5 minutes later it crashed completely and my computer wouldn't turn on. I went back to micro center to replace it, and upon receiving a new one, i plugged my hdmi from the monitor into the card, and the computer worked without the display drivers, when i installed the card drivers via device manager, my computer get to "starting windows" then my monitor gives "no signal". I went back again to micro center and replace the card, thinking it was faulty, but i still get the same results.
Also when i tried installing the drivers with the CD it says "could not install drivers because it could not find any compatible hardware" I also dont see my intel HD integrated graphics in Device manager. Lastly, i checked the bios settings to make sure the primary display is the pcie slot

any suggestions to this issue would be great
-Thanks

More about : installing graphics card drivers monitor signal

a b \ Driver
a b U Graphics card
a b C Monitor
November 24, 2013 1:32:58 PM

You won't see the integrated graphics chip in Device Manager because it's automatically disabled in the BIOS when a PCI or PCI-E graphics card is detected during boot.

The drivers on the CD supplied with the GTX 760 will be out of date now if you allow for the time it's been in warehouse and shop storage. Get the latest driver from the MSI website: http://uk.msi.com/service/download/
m
0
l
November 24, 2013 5:13:26 PM

Phillip Corcoran said:
You won't see the integrated graphics chip in Device Manager because it's automatically disabled in the BIOS when a PCI or PCI-E graphics card is detected during boot.

The drivers on the CD supplied with the GTX 760 will be out of date now if you allow for the time it's been in warehouse and shop storage. Get the latest driver from the MSI website: http://uk.msi.com/service/download/


Still same problem, when i restart my computer, my monitor gets no signal after "Starting Windows"
m
0
l
Related resources
December 2, 2013 5:30:48 PM

If you ever find out let me know here cuz I'm searching everywhere on the same problem and can't seem to find one solution at all :/ 
m
0
l
December 3, 2013 5:09:00 AM

so i replaced my HDMI with a DVI from my GPU to monitor, and now 75% of the time the monitor gives no signal after "windows is starting" the other 25% i can run the computer perfectly with no problems not sure what the problem is, whether its the mobo or what
m
0
l
!