no beep,no bios nor anything.

holydragon · Nov 25, 2013

When booting, there's no beep, bios or anything. Just running fans and drivers.

Tried resetting bios via jumper, no luck.

tried removing all the RAM, then there's the rapid beeping.
So, i tried putting back in one of the ram, and tried all slots, with all rams.
But as long as there's any RAM in the slots, it seems there will be no beeping, bios nor anything.

what's the problem is.
Mobo fried?
4 RAM fried at once?
4 slots fried at once?
All of the above?

I'm clueless now...

edit: And don't link me to "PERFORM THESE STEPS before posting".
I already tried everything there and it's not working.
It's not even a newly setup computer.
Just can't boot one day suddenly.

edit2: before this, my com can only detect 2 RAM.
It's working fine and read 4 RAM before, and one day, it only detect 2.
Tried switching rams and slots, but nth seems to broke, and it still read 2 RAM only.

alexoiu · Nov 25, 2013

What motherboard and CPU using? Does it have integrated graphics? If not, try borrowing a graphics card and test, if you haven't already (for ruling out a GPU issue).

holydragon · Nov 25, 2013

alexoiu :

Maximus III Gene, i7 (forgot which).

no extra GPU on hand now to try. Might have to wait tomorrow.

alexoiu · Nov 25, 2013

Without RAMs you should get 1 long 2 short beeps.
With RAMs installed, but no graphics card - 1 long, 3 short.

holydragon · Nov 25, 2013

alexoiu :

without rams, it just went unlimited short beeps.
with rams, it had the problem i stated above.
no bios, no beep, nothing.
Only fan and lights. and dvd drive.

alexoiu · Nov 25, 2013

Try starting the board with only CPU and CPU fan installed (remove all other RAM, PCI, USB, SATA components). See if still rapid beeps.

holydragon · Nov 25, 2013

alexoiu :

now that i only noticed, it's repeated long,short short When Ram is taken out.
And still no beep if took out GPU. (only).

alexoiu · Nov 25, 2013

Now insert single RAM module (GPU removed). Check each slot. See if getting 1 long 3 short.

holydragon · Nov 25, 2013

alexoiu :

when no RAM (and no gpu), there's still only one long, 2 short repeatedly.

when i put the RAM into one of the 4 slots,
there's a
Long beep, 3 short beep, pause shortwhile, long beep. then nothing forever.
Tried all 4 RAM, with all 4 slots.
But seems like only this particular RAM on this particular Slots works.

edit: Suddenly it doesnt work again.
The same particular RAM on the same particular Slots doesnt work anymore.

edit2: so i get it to work again, and inserted the GPU, and now the bios run with the normal beep.
I still have no idea what's going on.
Should i replace the motherboard if problem occurs again?
or its faulty RAM?

alexoiu · Nov 25, 2013

Hard to say what was wrong. But since working again... I don't think it's a motherboard issue.

holydragon · Nov 25, 2013

alexoiu :

Alright, so i guess the solution is....
particular RAM in particular slot, weirdly fixed it.

Btw,
if there's faulty RAM slot,
my only option is to replace the motherboard?

alexoiu · Nov 25, 2013

Yes, but a RAM slot can't get "faulty" by itself. It's just a connector. The memory controller is integrated into the CPU. Did you overclock?

holydragon · Nov 25, 2013

alexoiu :

ya, it was overclocked before,
but since during this fix,
i already did the jumper,battery bios reset thingy.
So the overclock should be gone now. I hope...

alexoiu · Nov 26, 2013

I suggest leaving it at default. I also have a P55 system and never felt the need to OC it.

Search

no beep,no bios nor anything.

holydragon

Honorable

alexoiu

Titan

holydragon

Honorable

alexoiu

Titan

holydragon

Honorable

alexoiu

Titan

holydragon

Honorable

alexoiu

Titan

holydragon

Honorable

alexoiu

Titan

holydragon

Honorable

alexoiu

Titan

holydragon

Honorable

alexoiu

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page