Sign in with
Sign up | Sign in
Your question
Solved

Computer only works in safe mode after restart?

Last response: in Graphics & Displays
Share
November 25, 2013 9:48:22 AM

hello, so i was downloading some programs on my new pc that i just built and hooked up the internet for. i was downloading the driver for my graphics card and after the download it said that it needed to reboot so i hit yes. after it showed the welcome screen the screen then went black. which i then waited for the normal procedure, which never happened. the screen just stayed black. i waited for about 5 minutes then i turned off the computer and turned it back on.and it said windows has recovered from an unexpected crash would you like to
start windows in safe mode
start windows in safe mode,networking
start windows in safe mode, networking with command line
or start windows normally

so i tried to start it normally and the same black screen came up. then i turned it off and on again and was able to start it in safe mode only. please tell me what to do im scared i hope i didnt break my computer. idont think i did but i dont know how to fix this!!

please only helpful answers

Best solution

November 25, 2013 10:02:24 AM

Try removing ALL the graphics drivers from your computer using this: http://www.guru3d.com/content_page/guru3d_driver_sweepe...

Someone else just had this same exact issue, there was a conflict between the integrated graphics and the GPU. Make sure you disable integrated graphics as well.
Share
November 25, 2013 11:57:46 AM

chumly said:
Try removing ALL the graphics drivers from your computer using this: http://www.guru3d.com/content_page/guru3d_driver_sweepe...

Someone else just had this same exact issue, there was a conflict between the integrated graphics and the GPU. Make sure you disable integrated graphics as well.


i tried that hoping it would work but the same thing happened please tell me you have another solution
m
0
l
!