I built my own computer and while i was playing League of Legends, it just turned off and won't turn on again.
The components are :
-Z87-A Socket LGA 1150 ATX Intel Motherboard
-HX Series HX850 850 Watt ATX 12V Modular Power Supply
-ReadyCache SDSSDRC-032G-G2 32GB SATA 6.0Gb/s Internal Solid State Drive (SSD)
-Barracuda 2TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive STBD2000101
-HyperX blu 8GB DDR3-1600 (PC3-12800) CL9 Dual Channel Desktop Memory Kit (Two 4GB Memory Modules)
-Core i5 4670K 3.4GHz Socket LGA 1150 Boxed Processor
-Two Radeon HD 7950 crossfire
The SSD is only for boot-up, im not sure if that is important but I'm just going to give as much information as i can so i can solve this problem sooner.
I am going to replace the thermal paste but it doesn't look to try except that some areas of the cpu aren't covered with it. After the computer turned off i checked the power supply which wasn't even really warm. Also the light that shows that the motherboard has power is also on, so i dont think its my power supply.
Please give as much advice as you can, because it was a very expensive build, i saved up a lot of money and worked a lot during the summer just to build it.
Thank you.
Update 1:
So I tried some stuff. Basically the computer wont turn on with my two GPU's plugged in. After i take out their power source it wont turn on until i remove and insert the RAM again. I've asked my friend who is experienced with computers and he said that this is just strange. Btw both GPU's are MSI.
Update 2:
It will boot with the GPU's unplugged and run on the intergrated gpu.
But as soon as i plug in the GPU's it refuses to boot. To be clear by refusing to boot nothing turns on. I know that the motherboard is getting power because of a light but when i hit the power button no lights turn on and no fans turn on.
The components are :
-Z87-A Socket LGA 1150 ATX Intel Motherboard
-HX Series HX850 850 Watt ATX 12V Modular Power Supply
-ReadyCache SDSSDRC-032G-G2 32GB SATA 6.0Gb/s Internal Solid State Drive (SSD)
-Barracuda 2TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive STBD2000101
-HyperX blu 8GB DDR3-1600 (PC3-12800) CL9 Dual Channel Desktop Memory Kit (Two 4GB Memory Modules)
-Core i5 4670K 3.4GHz Socket LGA 1150 Boxed Processor
-Two Radeon HD 7950 crossfire
The SSD is only for boot-up, im not sure if that is important but I'm just going to give as much information as i can so i can solve this problem sooner.
I am going to replace the thermal paste but it doesn't look to try except that some areas of the cpu aren't covered with it. After the computer turned off i checked the power supply which wasn't even really warm. Also the light that shows that the motherboard has power is also on, so i dont think its my power supply.
Please give as much advice as you can, because it was a very expensive build, i saved up a lot of money and worked a lot during the summer just to build it.
Thank you.
Update 1:
So I tried some stuff. Basically the computer wont turn on with my two GPU's plugged in. After i take out their power source it wont turn on until i remove and insert the RAM again. I've asked my friend who is experienced with computers and he said that this is just strange. Btw both GPU's are MSI.
Update 2:
It will boot with the GPU's unplugged and run on the intergrated gpu.
But as soon as i plug in the GPU's it refuses to boot. To be clear by refusing to boot nothing turns on. I know that the motherboard is getting power because of a light but when i hit the power button no lights turn on and no fans turn on.
Facebook
Twitter
Instagram