- Nov 27, 2013
- 2
- 0
- 10,510
Hello,
Just completed a new build and so far I have no Video so I can't even see if there are any other issues.
System is:
Rosewill Galaxy ATX Case
MSI FM2-A85XMA-E35 FM2 Trinity AMD A85X Motherboard
AMD A10-6800K Richland 4.1GHz (4.4GHz Turbo)- APU
Team Vulcan 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 Memory
CORSAIR CX600 PSU
Windows 8.1 64-bit OEM
I set-up the unit and made all connections. APU appears seated correctly and memory seems to be seated correctly. Re-seated memory just to be sure.
I have the old 250GB HDD from the Dell installed in SATA1 slot. I have not been able to start the new OS since I have no video.
I connected one Blu Ray/ DVD writer to the unit to have an optical drive for OS install. It's in SATA2
Keyboard, mouse and monitor are the only other connections at this point.
I was waiting to connect all other hardware once the OS was installed.
I believe all other wires are connected to the Mother board correctly.
Tried running HDMI and got no video either.
I have not heard any beeps at all. The speaker is hooked up.
I hope this helps. Please give me some advice.
Thank you
Just completed a new build and so far I have no Video so I can't even see if there are any other issues.
System is:
Rosewill Galaxy ATX Case
MSI FM2-A85XMA-E35 FM2 Trinity AMD A85X Motherboard
AMD A10-6800K Richland 4.1GHz (4.4GHz Turbo)- APU
Team Vulcan 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 Memory
CORSAIR CX600 PSU
Windows 8.1 64-bit OEM
I set-up the unit and made all connections. APU appears seated correctly and memory seems to be seated correctly. Re-seated memory just to be sure.
I have the old 250GB HDD from the Dell installed in SATA1 slot. I have not been able to start the new OS since I have no video.
I connected one Blu Ray/ DVD writer to the unit to have an optical drive for OS install. It's in SATA2
Keyboard, mouse and monitor are the only other connections at this point.
I was waiting to connect all other hardware once the OS was installed.
I believe all other wires are connected to the Mother board correctly.
Tried running HDMI and got no video either.
I have not heard any beeps at all. The speaker is hooked up.
I hope this helps. Please give me some advice.
Thank you
Facebook
Twitter
Instagram