So I built my own PC about 2 weeks ago - It went really well, but I need to brush up on cable management. Regardless I get great temps at idle and load.
But after looking at my motherboard through the case, when I boot my pc, the memOK light flahes red for less than a second - Is that a problem at all? My pc still detects 16gb of RAM.
Also, when I looked in my case, it looks like I managed to neglect putting in the extra 4 pin connector on my 24pin mobo (How, i'm not really sure.)
So anyway I plugged that in, and my pc was stuck at an asus screen saying "overclocking failed!" - I reset the PC, and it never happened again. Was that just the motherboard adjusting to moving to 24pin ?
UPDATE: Should probably have included my parts.
i7 4770 - ASUS H87M-PLUS - Corsair Vengeance 1600mhz - GTX 770 - 650w PSU - 1tb WD Black (which is the noisiest HDD i've ever heard in my life)
But after looking at my motherboard through the case, when I boot my pc, the memOK light flahes red for less than a second - Is that a problem at all? My pc still detects 16gb of RAM.
Also, when I looked in my case, it looks like I managed to neglect putting in the extra 4 pin connector on my 24pin mobo (How, i'm not really sure.)
So anyway I plugged that in, and my pc was stuck at an asus screen saying "overclocking failed!" - I reset the PC, and it never happened again. Was that just the motherboard adjusting to moving to 24pin ?
UPDATE: Should probably have included my parts.
i7 4770 - ASUS H87M-PLUS - Corsair Vengeance 1600mhz - GTX 770 - 650w PSU - 1tb WD Black (which is the noisiest HDD i've ever heard in my life)