x4 954 overclcoking Tags: Overclocking Last response: November 29, 2013 12:17 AM in Overclocking Share digitz November 28, 2013 1:00:11 PM I try to overclock my x4 965 on m3a770de i raise with multiplier to 3.7 and after few mins rinning prime95 my pc restarts? are there any options i need to disable or? More about : 954 overclcoking Z1NONLY a b K Overclocking November 28, 2013 1:11:28 PM Is it overheating or is it just unstable? m 0 l digitz November 28, 2013 2:53:16 PM Z1NONLY said:Is it overheating or is it just unstable? Temps are low, its just unstable m 0 l Can't find your answer ? Ask ! Get the answer schmuckley a b K Overclocking November 28, 2013 4:48:29 PM Point a fan or put some sinks on this area of the board: http://imgur.com/cNMHUkq What PSU are you using? Try to keep the voltage as low as possible for the clocks you have. m 0 l Z1NONLY a b K Overclocking November 28, 2013 7:48:31 PM If temps are good, you may have to bump voltage. Just make sure you stay under 1.45 volts, maximum. m 0 l digitz November 29, 2013 12:17:00 AM schmuckley said:Point a fan or put some sinks on this area of the board: http://imgur.com/cNMHUkq What PSU are you using? Try to keep the voltage as low as possible for the clocks you have. Why would i point some sinks on that area? and how am i supposed to do that? I have corsair cx430 m 0 l Can't find your answer ? Ask ! Publish Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !
digitz November 28, 2013 1:00:11 PM I try to overclock my x4 965 on m3a770de i raise with multiplier to 3.7 and after few mins rinning prime95 my pc restarts? are there any options i need to disable or? More about : 954 overclcoking
Z1NONLY a b K Overclocking November 28, 2013 1:11:28 PM Is it overheating or is it just unstable? m 0 l
digitz November 28, 2013 2:53:16 PM Z1NONLY said:Is it overheating or is it just unstable? Temps are low, its just unstable m 0 l
schmuckley a b K Overclocking November 28, 2013 4:48:29 PM Point a fan or put some sinks on this area of the board: http://imgur.com/cNMHUkq What PSU are you using? Try to keep the voltage as low as possible for the clocks you have. m 0 l
Z1NONLY a b K Overclocking November 28, 2013 7:48:31 PM If temps are good, you may have to bump voltage. Just make sure you stay under 1.45 volts, maximum. m 0 l
digitz November 29, 2013 12:17:00 AM schmuckley said:Point a fan or put some sinks on this area of the board: http://imgur.com/cNMHUkq What PSU are you using? Try to keep the voltage as low as possible for the clocks you have. Why would i point some sinks on that area? and how am i supposed to do that? I have corsair cx430 m 0 l