de-lidding the cpu

Toggle sidebar Toggle sidebar
Solution
H
Using that method it is advised that you use rubber coated vice grips although you don't have to. The vice clamps on the IHS, it doesn't need to be too tight. Do not bend the IHS otherwise your cooling solution won't be as effective. You put the wood in line with the PCB section of the CPU. You use the wood as a buffer so you don't damage the PCB, so place the wood in line with the PCB
Sort by date Sort by votes
H

Hazy125

Honorable
Oct 13, 2013
46
0
10,560
Using that method it is advised that you use rubber coated vice grips although you don't have to. The vice clamps on the IHS, it doesn't need to be too tight. Do not bend the IHS otherwise your cooling solution won't be as effective. You put the wood in line with the PCB section of the CPU. You use the wood as a buffer so you don't damage the PCB, so place the wood in line with the PCB
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom