He guys,
I am trying to flash my motherboard to the newest version. When i put the extracted file onto a usb and restart my computer, the file isnt there when i go on to asus easy flash.
There is a trick to pointing the utility to the drive and finally the bios file
You say that you are putting the extracted file onto the USB device are you doing this through windows explorer or a utility such as winzip, also check the format of the flash drive if it is NTFS or FAT32 as I vaguely remember that some utilities require FAT32 format to work properly
Just checked says drive has to be FAT 16/32 and a single partition
There is a trick to pointing the utility to the drive and finally the bios file
You say that you are putting the extracted file onto the USB device are you doing this through windows explorer or a utility such as winzip, also check the format of the flash drive if it is NTFS or FAT32 as I vaguely remember that some utilities require FAT32 format to work properly
Just checked says drive has to be FAT 16/32 and a single partition