Fans, Cooling, Wow

scotchcurry

Honorable
Nov 20, 2013
30
0
10,530
So I have the nzxt source 210, and it has 6 places for 120mm fans. I just found a deal online where I can get 80mm fans (Normally $20) for $0.99 a piece. I don't need them, but I was going to get some just because they are so cheap. However, I was wondering if they would even work with my case? Cheers.
 
Solution
Not without modding the case. There are no pre-drilled holes for 80mm fans. The specs state:
FRONT, 2 X 120mm (optional)
REAR, 1 X 120mm @ 1200rpm (included)
TOP, 2 X 120/140mm (optional)
BOTTOM, 1 x 120mm (optional)

Besides, small fans are noisier than large fans (all else being equal). Large fans move more air at less decibels than small fans. I'd skip the 80mm fan purchase. Maybe get a 120mm or 2 for the front of the case to pull in air. With a vented top, thermal dynamics will take hot air out the top of the case naturally.

makkem

Distinguished
Hi
These would not fit straight into your case but you can get 80mm to 120mm adaptor rings,however these plus the cost of the fan would cost nearly as much as a 120mm fan.
Also 80mm fans are loud a few of those in a case would be deafening,this plus increased airflow is why modern cases are designed for larger diameter fans.
 

clutchc

Titan
Ambassador
Not without modding the case. There are no pre-drilled holes for 80mm fans. The specs state:
FRONT, 2 X 120mm (optional)
REAR, 1 X 120mm @ 1200rpm (included)
TOP, 2 X 120/140mm (optional)
BOTTOM, 1 x 120mm (optional)

Besides, small fans are noisier than large fans (all else being equal). Large fans move more air at less decibels than small fans. I'd skip the 80mm fan purchase. Maybe get a 120mm or 2 for the front of the case to pull in air. With a vented top, thermal dynamics will take hot air out the top of the case naturally.
 
Solution