PC fully freezes during gameplay, looking for fix!

Status
Not open for further replies.

PChan94

Honorable
Dec 2, 2013
4
0
10,510
Hi everyone, I built a PC around June, 2013 specifically to play games on it. Recently i bought Far Cry 3 and AC4:Black Flag on steam during the sale.
I'm currently experiencing a full freeze on my PC when going through the game. The time it freezes my computer in both games are specific. (Example, Far Cry 3 tutorial when sneaking out of Vaas's camp).
My computer can handle everything else fine, web browsing, youtube, videos, streaming. Its only when i play specific games (FarCry3, AC4) that causes a complete freeze on my computer.

My computer specs
OS: Windows 8 64bit.
MOBO: Gigabyte GA-970A-UD3 AM3+ AMD 970 SATA
CPU: AMD FX-8350 Vishera 4.0 GHz
GPU: XFX Double D FX-787A-CDBC Radeon HD 7870 GHz Black Edition.
RAM: 8GB DDR3 1866

Thanks Everyone!
 
Solution
have you tried uninstalling the drivers for your 7870, updating .NET framework (to most current) and re-install the driver. If you are using beta use stable, if your using stable, try the beta. Can you run a test with Furmark? Burn in test with at least 2x MSAA and a highish resolution and fullscreen (exit key to stop test) (1366 x 768 is good). Tell us the % load on the GPU, and the GPU fans, and max temps throughout. I have that same graphics card, and I have no problems with FC3, I don't play AC though..
Also look into yout catalyst control manager, gaming/3d settings tab-----> change all the settings to application managed (not AMD optimized). Verify the integrity of the games on steam too.
Last case, if you havnt done so, could be...
have you tried uninstalling the drivers for your 7870, updating .NET framework (to most current) and re-install the driver. If you are using beta use stable, if your using stable, try the beta. Can you run a test with Furmark? Burn in test with at least 2x MSAA and a highish resolution and fullscreen (exit key to stop test) (1366 x 768 is good). Tell us the % load on the GPU, and the GPU fans, and max temps throughout. I have that same graphics card, and I have no problems with FC3, I don't play AC though..
Also look into yout catalyst control manager, gaming/3d settings tab-----> change all the settings to application managed (not AMD optimized). Verify the integrity of the games on steam too.
Last case, if you havnt done so, could be (after trying/re-trying new drivers) would be to un-install and re install the games that are giving you headaches.
 
Solution

PChan94

Honorable
Dec 2, 2013
4
0
10,510
Hi Beezy, sorry for the late reply! I updated all my drivers last night, and am currently following your instructions by updating my .net framework right now. I'm using the stable driver currently, so i'll definetly give beta a look.
Furmark at 1600x900
GPU Usage 99%, fan 96%
Temp: Min:54C, 96C
I have changed all the settings in Catalyst to application managed, and already verified the integrity of the cache.
 


if 96 degrees is the max thats kinda hot..For me when i had stable my furmark was skippy and bioshock straight up crashes while loading my continue game. Then i update back to the beta 13.11_9.4 something like that, my furmark was smooth again, and bioshock worked
 

PChan94

Honorable
Dec 2, 2013
4
0
10,510


when i use furmark the temp just consistently climbs up. i updated drivers to beta and i managed to play far cry 3 past the tutorial. However it still froze my whole computer when i died.
 

PChan94

Honorable
Dec 2, 2013
4
0
10,510
computer definitely meets minimum requirements to play it, and i havent overclocked my system =\. i dont have that many programs on my computer as well. its very strange. thanks everyone for the responses
 
Status
Not open for further replies.