- Dec 4, 2013
- 2
- 0
- 10,510
im having a problem with my asrock extreme4 gen3 motherboard
my specs:
intel 3rd gen 3450
8gb ram 2x4
300W power supply
for display im just using Built in Videocard
here's what i have done already
*remove and insert memory module (same output of drDebug.)
*I already cleaned my ram and insert it again
*clear Cmos or reset CMOS
*i bought another bios and i just received it today. but still doesnt work
here's whats going on
when I start or press ON.
Processor's fan will run.
dr debug shows. Code 15
after some seconds...
it shows Code 20
Then shut off about some seconds as the fan shuts off too.
then it will turn on and just repeat the process above. Just to clarify. there is no display when this process is going on.
Before this thing happened.
we did not use the computer for about 5hrs. and when tried to opened it. this thing came on.
Hope someone Could help.
Thank you.
my specs:
intel 3rd gen 3450
8gb ram 2x4
300W power supply
for display im just using Built in Videocard
here's what i have done already
*remove and insert memory module (same output of drDebug.)
*I already cleaned my ram and insert it again
*clear Cmos or reset CMOS
*i bought another bios and i just received it today. but still doesnt work
here's whats going on
when I start or press ON.
Processor's fan will run.
dr debug shows. Code 15
after some seconds...
it shows Code 20
Then shut off about some seconds as the fan shuts off too.
then it will turn on and just repeat the process above. Just to clarify. there is no display when this process is going on.
Before this thing happened.
we did not use the computer for about 5hrs. and when tried to opened it. this thing came on.
Hope someone Could help.
Thank you.
Facebook
Twitter
Instagram