My monitor says "Check signal cable" when my pc is shut down, but it works properly when on
Last response: in Graphics & Displays
Related resources
- my pc boots shuts down the reboots by itself and monitor says no signal detected Forum
- the "self test check your pc and signal cable monitor is working" Forum
- SolvedDevice mgr says Nvidia card is working properly, but no signal to monitor Forum
- My monitor displays blank screen and has a box that says Check Signal Cable err Forum
- SolvedI turn on the emachine and the monitor says Self Check/Check Monitor/Check PC Cables I check them all but it won't turn on Forum
- Videocard not working, when connected, monitor shows ''Check cable connection'' or ''No signal received'' Forum
- Monitor says no signal then shuts down Forum
- Second Monitor Not Working (Check Signal Cable) Forum
- Connecting PC to HDTV (Samsung). HDMI cable worked previously but now says No Signal. Forum
- Graphics card installed for 2 monitor capability- it worked and after I shut down PC, screen is blank Forum
- GPU stops sending signal to monitor after gaming ===>PC Shuts down Forum
- SolvedCheck signal cable message on monitor (new motherboard and cpu) Forum
- My PC starts properly at Work, but at Home, shuts down after 3 seconds Forum
- Monitor works when booting, then says "no signal" after booting. Forum
- My monitor will turn on with a new build. It says no signal. I tested the monitor and it works. I plugged my graphics card and Forum
- No VGA monitor signal - graphics card works properly in device manager Forum
- 3DTV + PC via HDMI Cable says No signal Forum
- Monitor says no signal, but mobo properly functioned prior and booted to its interface? Forum
- SolvedHDMI not working properly, "check cable connection" error Forum
- My PC Doesn't shut down properly Forum
- More resources
Read discussions in other Graphics & Displays categories
!