Sign in with
Sign up | Sign in
Your question
Solved

Thermaltake level 10 gt

Tags:
  • Storage
  • Build
  • Thermaltake
Last response: in Storage
Share
December 4, 2013 1:15:45 PM

Hey guys so I just finished putting together my first build, and everything is working fine. There is one thing i don't know how to get to work though. The case that I bought was a Thermaltake level 10 gt snow edition. The thing that i cant get to work is the hot swap system on it. The mobo that im using is an Asus p8z77-v pro. The manual says i have to ahci, but i have no clue how to do that. Do you guys have any ideas?

More about : thermaltake level

Best solution

a c 958 G Storage
December 4, 2013 7:12:02 PM

The setting for ahci is in the bios where you might also find one for enabling hotswap. Have a read thru the motherboards manual, particularly the BIOS section.
Share
December 5, 2013 12:57:24 AM

Yea I found that, Ive enabled ahci and the drives, but for some reason it still wont show up on my system. Or do you know of a way to just get the two drives working at the same time. Im using a samsung 250gig ssd, and a seagate 1tb hdd. I want to use the 1tb drive for storage.
m
0
l
!