R runedj4 Honorable Oct 1, 2012 175 0 10,710 Dec 5, 2013 #1 alright their was some paper like stuff on the one side of the back plate got dmaged druuing shiping is this this alright?
alright their was some paper like stuff on the one side of the back plate got dmaged druuing shiping is this this alright?
Solution jay_nar2012 Dec 5, 2013 Well if you have electrical tape, ypu could use that to cover the contacts instead.
jay_nar2012 Distinguished Jun 15, 2012 3,224 0 21,160 Dec 5, 2013 #2 http://www.youtube.com/watch?v=OrnWVHdhGJ0 Upvote 0 Downvote
R runedj4 Honorable Oct 1, 2012 175 0 10,710 Dec 5, 2013 #3 He dose not sat would it be fine? Upvote 0 Downvote
jay_nar2012 Distinguished Jun 15, 2012 3,224 0 21,160 Dec 5, 2013 #4 well i didn't see a piece of paper when he installed his backing plate, so im assuming its ok unless it was there to insulate the metal from the board. Upvote 0 Downvote
well i didn't see a piece of paper when he installed his backing plate, so im assuming its ok unless it was there to insulate the metal from the board.
jay_nar2012 Distinguished Jun 15, 2012 3,224 0 21,160 Dec 5, 2013 #5 Test fit the backing plate and see if it contacts any solder points on the motherboard. Upvote 0 Downvote
R runedj4 Honorable Oct 1, 2012 175 0 10,710 Dec 5, 2013 #6 jay_nar2012 : Test fit the backing plate and see if it contacts any solder points on the motherboard. I am rmaing it, as it dose touch the bored. Upvote 0 Downvote
jay_nar2012 : Test fit the backing plate and see if it contacts any solder points on the motherboard. I am rmaing it, as it dose touch the bored.
jay_nar2012 Distinguished Jun 15, 2012 3,224 0 21,160 Dec 5, 2013 Solution #7 Well if you have electrical tape, ypu could use that to cover the contacts instead. Upvote 0 Downvote Solution
R runedj4 Honorable Oct 1, 2012 175 0 10,710 Dec 5, 2013 #8 jay_nar2012 : Well if you have electrical tape, ypu could use that to cover the contacts instead. thanks for the help but its the peaces for the whole, thanks. Upvote 0 Downvote
jay_nar2012 : Well if you have electrical tape, ypu could use that to cover the contacts instead. thanks for the help but its the peaces for the whole, thanks.