Sign in with
Sign up | Sign in
Your question

Will My Radiator Fit In My Case???

Tags:
  • Overclocking
  • Water Cooling
  • NZXT
  • Dual
  • Cases
  • Configuration
Last response: in Overclocking
Share
December 5, 2013 3:10:54 PM

I will be getting a NZXT Phantom 410 mid-tower case. I also plan to get a XSPC AX240 dual 120mm radiator. Will I be able to fit this radiator in my case in a pull configuration. Also where would I mount the reservoir, would it fit in the front if I removed two 5.25" drive bays and had an optical drive in there too?

Here is a link to the case and the radiator:

Case: http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Radiator: http://www.frozencpu.com/products/17141/ex-rad-440/XSPC...

More about : radiator fit case

a b K Overclocking
December 5, 2013 3:48:40 PM

Yes, you can mount it in the case with pull. I recommend fitting it on the top of the case so the heated air will exit immediately.
m
0
l
December 5, 2013 7:36:39 PM

  1.  
Nuclear101 said:
Yes, you can mount it in the case with pull. I recommend fitting it on the top of the case so the heated air will exit immediately.


Are you saying to mount the rad externally and will the reservoir our fit?
m
0
l
Related resources
a b K Overclocking
December 5, 2013 8:00:17 PM

Sorry, I meant to say you can mount it internally, but at the top of the case. What type of reservoir are you using?
m
0
l
December 6, 2013 6:58:54 AM

Nuclear101 said:
Sorry, I meant to say you can mount it internally, but at the top of the case. What type of reservoir are you using?


Well I'm getting a complete kit (XSPC Raystorm 750 AX240 Universal CPU Water Cooling Kit (New Rev. 4 Pump Included) w/ Free Dead-Water) so the reservoir it comes with is the: XSPC X20 750 Dual 5.25" Pump / Reservoir Combo. It has the pump built into it.
m
0
l
a b K Overclocking
December 6, 2013 2:40:47 PM

Oh then yes, they will both fit. If the reservoir doesn't fit, then just move it to the bottom 2 ODD bays.
m
0
l
a b K Overclocking
December 6, 2013 2:40:47 PM

Oh then yes, they will both fit. If the reservoir doesn't fit, then just move it to the bottom 2 ODD bays.
m
0
l
December 6, 2013 7:11:28 PM

Nuclear101 said:
Oh then yes, they will both fit. If the reservoir doesn't fit, then just move it to the bottom 2 ODD bays.


So the reservoir and the optical drive would both fit in the three optical drive bays and the optical drive bay front cover would be able to close? And so the ax240 would fit with 2x120mm fans in pull, inside the case, and not be touching the motherboard?
m
0
l
!