Sign in with
Sign up | Sign in
Your question

[STRESSED] What is the problem with that picture ?

Tags:
  • Components
Last response: in Components
Share
December 7, 2013 7:14:36 AM

Hello, first I'm french so sorry for my english.

I just bought new memory, kingtson predator 2x8go 2133mhz but On the bios I have this:



http://www.noelshack.com/2013-49-1386428699-android-ima...


Si i just bought it for nothing ?... i can't go higher than 1600 but my motherboard can go to 2400 ( asrock z75-pro3)


thanks

More about : stressed problem picture

December 7, 2013 7:18:03 AM

Selecting "Load XMP Setting" should do the trick, as if you look, XMP profile 1 seems to be the right speeds. RAM modules above 1600mhz always need to have their profiles set or to be manually adjusted to the correct speeds.
m
0
l
December 7, 2013 7:19:14 AM

shit clicked again on solved...


it's not solved.


I tryed your solution but didn't work...
m
0
l
Related resources
December 7, 2013 7:21:49 AM

In that case you need to manually adjust the speed, timings and volts if the XMP profiles aren't working for you.
m
0
l
December 7, 2013 7:30:34 AM

I've just had the sailer on the phone and he said I have to overclock manually... i don't know how to do, he said changes bus fréquence and other thing...


Hopfully i bought the memory 50% it's price
m
0
l
December 7, 2013 7:39:31 AM

Overclock the ram in the bios and make sure your timings are correct.
m
0
l
December 7, 2013 7:40:14 AM

no i don't know how to do it, i'm stressed about doing it.
m
0
l
December 7, 2013 12:12:53 PM

Take a picture of DRAM configuration and I'll tell you what settings to change.
m
0
l
December 7, 2013 12:43:48 PM

sorry i was out, my phone camera really sucks
m
0
l
December 7, 2013 12:46:44 PM

I put my old memory again, with it i can have 1600 , on the kingston predator i could have 1333mhz... i can't believe it.

( my memory is hyperx 8go 1600mhz now )
m
0
l
December 7, 2013 1:23:14 PM

Does my motherboard supports 8go 2113 mhz ? or just 4 go 2133mhz ? ( asrock z75-pro3 )
m
0
l
December 7, 2013 2:04:43 PM

When i press xmp profil 1 it's not working, it's reseeting in default but it's working with the profil 2 which is in 1600mhz...
m
0
l
December 7, 2013 2:27:38 PM

do I have to do a new thread ?
m
0
l
December 7, 2013 3:45:41 PM

Your motherboard supports up to 2800mhz. That CPUZ picture is fine, those readings are x2, so it's actually running at 1600mhz. As for the XMP profiles, we've already established that they aren't working and that you'll need to set it manually. You either need to research how to do it or post pictures up so someone can help you with settings.
m
0
l
!