GTX 680 Black screen and fans running fast from start

black9white

Honorable
Aug 5, 2012
76
0
10,630
I dont which section to post this but here it goes:

I came from a gtx 770 4gb to a gtx 680 2gb and finally to a gtx 680 4gb (I know so many similar cards) and installed it in my system. After that I noticed that the fans were on full speed.. which was odd. And then it went to boot to windows (obviously using the integrated driver and not the gpu), it then proceeded to install the gtx 680 after that I restarted the computer. After the loading screen, it couldnt boot into the windows OS, its just black screen and the fans are running at max speed so I just turned it off.

The next day I uninstalled all the drivers and also use ddu, but to no avail. I also went to the bios and change it to pcie rather than igpu still to no avail frown.gif

I dont know what is wrong is it my power supply or my gpu or my motherboard? should i reformat my pc? i dont have any spare gpu and psu to use so i dont know what is the problem :/

i also tried putting the gpu to another pcie slot, cleaning the pcie slot and also updating the bios still to no avail.

what do you guys think the problem is?

Specs:
3770k
sabertooth z77
vengeance LP 8gb 2x2
Noctua d14
GTX 680 4gb (Palit)
Corsair HX1000
500gb wd black
1tb seasonic
 

black9white

Honorable
Aug 5, 2012
76
0
10,630


Yes they are properly connected, the thing is once the pc identifies and uses the graphic card it blackens out after the loading screen