1st build not booting up.

alex23729

Honorable
Dec 11, 2013
11
0
10,510
So I have been up sine 10 last night putting this together, I might be a little tired. I put everything together, connected all the power cables (except one who could be the culprit, I just had no idea where it might go. Might just be a different kind of power supply.) When I press power everything lights up, cpu fan, graphics card pci is green lit, I hear the MB beep. Yet I see nothing on the monitor. It's not the monitor or hdmi cable, I checked. Please help.
 

alex23729

Honorable
Dec 11, 2013
11
0
10,510


Ok, so it might be the brass connectors. The case only came with 3 and its has the 9 things to hold it the MB in place, I only saw 3 of the brass things so I figured it wasn't necessary. Could this be it? It still makes a beep when press the power button...
 

alex23729

Honorable
Dec 11, 2013
11
0
10,510


No they're lifted off the case. Could there be a possibility I used too much thermal paste? I don't think I did but maybe I overdid it.......I'm freakin stumped
 

alex23729

Honorable
Dec 11, 2013
11
0
10,510

Ok, some success. I plugged in the dvi (in addition to the hdmi) and it started working! Which is good, but still I want to be able to use the hdmi port obviously. Any suggestions on my best course of action moving forward? Keeps getting weirder...
 

alex23729

Honorable
Dec 11, 2013
11
0
10,510
Wow....I must ask you all for forgiveness, for I am dumb. Switched my monitors display from dvi...to hdmi. That was it. Wow. On a positive note thanks for all the advice guys! Now to figure out what this " reboot and select proper driver" puzzle means....