Gigabyte Motherboard Z77X-UD5H failing to boot

Toggle sidebar Toggle sidebar
T

termody

Honorable
Dec 11, 2013
3
0
10,510
Gigabyte Motherboard Z77X-UD5H failing to boot, getting a rapid succession of beeps before shutdown.
Using OCZ 850W PSU (OCZGXS850) with both connections put in properly, and only connected to motherboard.

Any ideas? The PSU was working just fine in old computer an hour ago.
Thanks!
 
Solution
L
Your z77x-ud5h board should have a debug LED display located in the corner of the MB near the memory sticks.

Look at what error is displayed on the LED and go to t he debug LED code section of the MB manual. This should get the problem figured out.

I believe that you need to have a cpu fan connected to the MB cpu fan header for the board to boot up. This might be your issue.
Sort by date Sort by votes
T

termody

Honorable
Dec 11, 2013
3
0
10,510
There's no grouping at all, a constant beep beep beep beep beep etc. until it shuts itself back down about 15s later. Iread that might be a power supply issue, but as I said, it was working fine just hours before.
 
Upvote 0 Downvote
L

LouBraun

Honorable
Dec 10, 2013
28
0
10,560
Your z77x-ud5h board should have a debug LED display located in the corner of the MB near the memory sticks.

Look at what error is displayed on the LED and go to t he debug LED code section of the MB manual. This should get the problem figured out.

I believe that you need to have a cpu fan connected to the MB cpu fan header for the board to boot up. This might be your issue.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom