I am in the process of building my first ever pc! Everything it going absolutely fine, but I'm just having a few issues with Power Supply Leads. Firstly, I was wondering if anyone could point me in the direction of a diagram labelling all of the leads (and their use.) I have got the 24pin connected and CPU fan, as they're both labeled. However, my case, the K380, has two white Molex, one for the Top red LED and one coming from the bottom fan. I don't know where to plug these. Also, I have 2 usb2.0 headers on the motherboard, but I haven't seen any USB headers coming from the case. Finally, there is a port labelled SYS_FAN, and I was wondering what I plug there?
So, to sum up:
1)Diagram of Leads (tried googling, no luck)
2)K380 Molex lead use/location.
3)USB2.0 (or lack of) headers.
4) SYS_FAN plug location.
Thanks for any help you can give me.
(Extra Info:
Case: Cooler Master K380
PSU: Croshair Builder 750W)
So, to sum up:
1)Diagram of Leads (tried googling, no luck)
2)K380 Molex lead use/location.
3)USB2.0 (or lack of) headers.
4) SYS_FAN plug location.
Thanks for any help you can give me.
(Extra Info:
Case: Cooler Master K380
PSU: Croshair Builder 750W)
Facebook
Twitter
Instagram