Hi, ive just finished building a PC, after i finished putting it altogether fired it up, and everything seemed to be going fine, however it will not connect to any monitor, have tried vga, dvi, & hdmi, as well as different monitors, i swapped in a new gpu which i knew was working and still nothing, i swapped in a new cpu, still nothing, swapped the motherboard, still nothing, all the components used were brand new, so please any suggestions as im at a loss here, specs below
Corsair cx500m psu
G-skill RIPWJAWS 8G ram
Asus m5a97 LE R2.0 motherboard
Asus Nvidia GEFORCE GT610 Gpu
AMD fx6350 cpu
All cables are correctly connected the computer seems to be running fine, i have even breadborded the system and still no joy.
the motherboard has no on board graphichs so cannot even get into BIOS & I have cleared the CMOS.
Corsair cx500m psu
G-skill RIPWJAWS 8G ram
Asus m5a97 LE R2.0 motherboard
Asus Nvidia GEFORCE GT610 Gpu
AMD fx6350 cpu
All cables are correctly connected the computer seems to be running fine, i have even breadborded the system and still no joy.
the motherboard has no on board graphichs so cannot even get into BIOS & I have cleared the CMOS.
Facebook
Twitter
Instagram