- Dec 14, 2013
- 3
- 0
- 10,510
hey guys her is a list of my parts
MSI Socket FM2/AMD A75/DDR3/SATA3&USB3.0/A&GbE/MicroATX Motherboard FM2-A75MA-E35
Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX
Corsair Vengeance Blue 4GB (1x4GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CMZ4GX3M1A1600C9B)
Advanced Micro Devices AD750KWOHJBOX 100W Quad Core Graphics Processor 3.4
1 x ($119.99) XFX Core Edition FX-785A-ZNL4 Radeon HD 7850 1GB 2
1 x ($59.99) Thermaltake TR2 TR-700 700W ATX 12V V2.3 & EPS 12V
1 x ($29.99) CFI Prime 311 CFI-A0991 Black ATX Mid Tower Comput
so here is what happend so far i followed all the instructions and believed to have put everythig in the right place with the mothboard following the positive and negative when inserting the front panal were they need to go. once my set up was done i reliazed a couple of things that i DID not take into considertion was ESD, the youtube videos i watch did not explain this to me untill i strted reading on this website. i was working over carpet and on a wooden table. next was the motherboard. again thevids i watch did not say anything about the spacing screws untill i attempted to try and screw the board to the actual case and relaize they would not reach. so with everything completed i attempted to turn on the comp, but nother happend no fans no lights nothing was working once i plugged the power supply on and tried to turn it on... so my next question what should i do? rma everything?
MSI Socket FM2/AMD A75/DDR3/SATA3&USB3.0/A&GbE/MicroATX Motherboard FM2-A75MA-E35
Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX
Corsair Vengeance Blue 4GB (1x4GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CMZ4GX3M1A1600C9B)
Advanced Micro Devices AD750KWOHJBOX 100W Quad Core Graphics Processor 3.4
1 x ($119.99) XFX Core Edition FX-785A-ZNL4 Radeon HD 7850 1GB 2
1 x ($59.99) Thermaltake TR2 TR-700 700W ATX 12V V2.3 & EPS 12V
1 x ($29.99) CFI Prime 311 CFI-A0991 Black ATX Mid Tower Comput
so here is what happend so far i followed all the instructions and believed to have put everythig in the right place with the mothboard following the positive and negative when inserting the front panal were they need to go. once my set up was done i reliazed a couple of things that i DID not take into considertion was ESD, the youtube videos i watch did not explain this to me untill i strted reading on this website. i was working over carpet and on a wooden table. next was the motherboard. again thevids i watch did not say anything about the spacing screws untill i attempted to try and screw the board to the actual case and relaize they would not reach. so with everything completed i attempted to turn on the comp, but nother happend no fans no lights nothing was working once i plugged the power supply on and tried to turn it on... so my next question what should i do? rma everything?
Facebook
Twitter
Instagram