The computer in question is composed of:
Motherboard:
ASUS SABERTOOTH Z87
CPU:
Core i5 I5-4670K
Graphics card:
eVGA GeForce GTX 760 Superclocked w/ ACX Cooler (2 GB)
PSU:
XFX Core Edition PRO650W
RAM:
Kingston HyperX blu 2 x 8 GB
HD:
Samsung 840 EVO MZ-7TE250 250 GB
along with an old 500GB HDD
I built this computer about 2 weeks ago and it's second time i'm running into this issue. First time was the day after i put the computer together (note that prior to both times this happened the computer booted fine) I then tried to figure out what was causing it but then it suddenly just started working again and i figured heck it working so no need to look any further. Now however the problem has resurfaced and this time it doesn't seem to just want to go away.
What specifically happens is when I press the power button on the PC everything seems to power on for a second but then everything cuts out seemingly before POST which means I currently have no feedback from the MB as to what could be causing this issue.
So far I've made sure that all the cables and components are firmly in their sockets and aside from that I've tried running with only a single memory stick socketed in.
Hoping there might be someone with some insight as to what might be causing this
Motherboard:
ASUS SABERTOOTH Z87
CPU:
Core i5 I5-4670K
Graphics card:
eVGA GeForce GTX 760 Superclocked w/ ACX Cooler (2 GB)
PSU:
XFX Core Edition PRO650W
RAM:
Kingston HyperX blu 2 x 8 GB
HD:
Samsung 840 EVO MZ-7TE250 250 GB
along with an old 500GB HDD
I built this computer about 2 weeks ago and it's second time i'm running into this issue. First time was the day after i put the computer together (note that prior to both times this happened the computer booted fine) I then tried to figure out what was causing it but then it suddenly just started working again and i figured heck it working so no need to look any further. Now however the problem has resurfaced and this time it doesn't seem to just want to go away.
What specifically happens is when I press the power button on the PC everything seems to power on for a second but then everything cuts out seemingly before POST which means I currently have no feedback from the MB as to what could be causing this issue.
So far I've made sure that all the cables and components are firmly in their sockets and aside from that I've tried running with only a single memory stick socketed in.
Hoping there might be someone with some insight as to what might be causing this