Graphic Card causes Pc not to boot.

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630
Hi! The problem ocured on my Asrock G 41 M-S motherboard, after purcasing this video card (dit some benchmark testing first-was Ok), after a day I tried to power on the PC: booting, windows 7 logo, black screen, no signal input. I've tested the Mb with other video card, worked perfectly. I' ve changed even the power suply, nothing. after a while, i've changed my Pc: Asrock 970 extreme 3 R.2, Amd Fx 8350, thinking it was the old motherboard's fault. I've instal;led fresh windows 7 (working but lagging due the missing drivers), but after updating latest drivers, and restart:: BSOD, POWER ON again: loading windows logo, black screen, restarting. Can't even get into safe mode: loading to infinite, but after trying and trying i've managet to get to safe mode and unistal drivers. After that, the computer is booting, image lagging (no drivers) but every thing working ok. installed gpu gadget: doesn't even se my video card, zeros everywhere. I've tried startup repair, everything, please help! Ps: Inno 3D I Chill Nvidia GeForce 560 Ti, GeForce 331.82 Driver Whql
 

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630
GeForce 331.82 Driver Whql from Nvidia.com, windows 7 Ultimate 64 Bit (I've checked not to mistake), on the older PC I had Win & Ultimate 32 bit, also downloaded 500 series, for 32 bit, same Pc Freeze/Restart.
 

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630
GeForce 331.82 Driver Whql from Nvidia.com, windows 7 Ultimate 64 Bit (I've checked not to mistake), on the older PC I had Win & Ultimate 32 bit, also downloaded 500 series, for 32 bit, same Pc Freeze/Restart.
 
Hello... are you loading the Driver ONLY? or the other Crapware with the Driver install? do the custom install and just do the DRIVER only... just in case the other stuff might be at fault.
You can run an older version with that older GPU... I'm running version 9.18.13.1422 and dated 3/14/2013, 64 bit with that same GPU.
 

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630
scuze me not to answer quiqly, I was on the other pc, trying the 314.22 version of the driver (expres instal), restarted and BSOD again, bios sees the Videocard, when booting windows, after a few seconds a 10 centimeter flashing line apears and No video signal, then restart. When I have no drivers desktop is lagging a litle, but I can watch 1080p videos on youtube (windows installed adapter Not Nvidia) :( Thank you for helping
 

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630
the chipset drivers were instaled 1 day ago, even if i made the mistake of installing video drivers first, i've reinstalled them a couple of times, whan I had the older Gts 450 on, worked instantly whiyh no problems. sorry for bad english
 

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630

I wrote everything I remember for a better solution, hope the videocard is not fried, whitout drivers I managed to se 1080p clips on youtube-no lagging. maybe in the past I tried to connect a power pin (not well conecte to te adaptor wire 4 pin -to six pin when still working) I even forced the gpu to enter on the old motherboard (back then I had a smaller case, and the gpu large vents were holding in sata and other conecctors wires on the board) maybe I broke some cold circuit/contact Thanks for trying to help!
 

Mircea Benga

Honorable
Dec 3, 2013
80
0
10,630
On my old case i've forced a litlle to fit in, maybe I broke some cold contacts? Found on youtube videos how to repair video card by baking in the oven at@ 385 F for 8-10 minutes (as advice others give in the last 30 seconds +420 F-for soldering who melts st higher temperature) to alow the soldering to remelt step by step. many secceded falowing the steps shown there. If I can't get any solution, I'll proced baking the card, I've got nothing to lose anyway :(