Sign in with
Sign up | Sign in
Your question
Solved

Do I need risers. Please help first time builder.

Tags:
  • Cases
  • Aerocool
  • Systems
Last response: in Systems
Share
December 15, 2013 4:57:44 AM

Hi,
The case I am using is the Aerocool Advance GT shown in the link below.
http://content.hwigroup.net/images/products/xl/198292/5...

I am not too sure where I have to use risers/Standoffs any help would be greatly appreciated.

More about : risers time builder

December 15, 2013 5:02:34 AM

What does the manual say? I'll be it says something like "Screw the standoffs into the holes that match your motherboard"
m
0
l

Best solution

December 15, 2013 7:29:31 AM

All cases will require threaded stand-off's. The stand-off's are installed into the case to give you a thread hole into which to screw down your motherboard.

That said; this case appears to have nine (9) black washer like "things" in the correct places for stand-off's (sorry, can't tell from the photo). IF those 9 locations have a screw thread in the center, they ARE your stand-off's. Just install the motherboard, with a screw going thru the motherboard and into each of those stand-off's
Share
!