jww250 :
I am new to PC gaming so i bought a cheap PC and i want to upgrade it but i don't know what to upgrade, i was thinking the processor?
If you could also link a part that would be appreciated. Thanks
My PC: http://www.cclonline.com/product/110328/NoMfgCode/All-CCL-Desktops/CCL-Elite-Hawk-III-Gaming-PC/CCL-EL-HWK3/
first of your cpu is fine why someone is suggesting a fx 6300 when you have a fx 4300 is nonsense thats a waste of money since your only got 120 to spend though i suggest jumping your budget up
7850 will whack your frames up whats your bottleneck is the gpu its a weak card 7770 is entry level
keep in mind these are ultra settings
http://gpuboss.com/gpus/Radeon-HD-7850-vs-Radeon-HD-7770
http://www.scan.co.uk/products/2gb-xfx-radeon-hd-7850-core-edition-4800mhz-gddr5-28nm-gpu-860mhz-1024-cores-dvi-hdmi-mdp-plusfree-g
http://www.ebuyer.com/429985-corsair-cx-series-cx600m-atx-power-supply-cp-9020060-uk
this will improve your gaming performance more psu is important to upgrade yes its easy to upgrade if you know how
this guy shows the importants he also mentions the motherboard power connector has a push in tab to release while you pull e.g like a clothes peg. second thing he discconnects is the power to motherboard which he shows the close peg like latch
http://www.youtube.com/watch?v=bXGgK-Fpjfc
install psu like in video using same screws that came with old psu
http://www.youtube.com/watch?v=iPTDz9LXWqY
one thing video 2 does not show is you have to unscrew the nut holding the card in place to the case also your latch may be diffrent to release the card so be careful disconnect any connections to the card usually has a similar peg interface like the motherboard connector.
once removed old card install card and connect the pci connectors to the card and screw bolt back in place done.
i have chosen a modular design psu for you so you dont get confused by half a tonne of wires and you only use the wires you need
(don't forget to dissconect the last psu)
Facebook
Twitter
Instagram