MSI Radeon R9 270x screen issue(white strips)

Hello, I have issue with my new GPU. I have old monitor (HP v220) and I connected with it my new PC. It's connected by D-sub and VGA adapter because that monitor don't have analog interface. When I'm playing in BF3 or other new games, when I'm standing in dark place I can see white strips passing through the screen (horizontally). It's a bit annoying and I didn't have the problem on my old computer with my monitor, so I think it's GPU fault. What should I do, I have the newest drivers...
Here's video :
12 answers Last reply Best Answer
More about msi radeon 270x screen issue white strips
  1. I cannot find any abnormalities on the video.
  2. I know hard to see it on that video, but with the naked eye it's clearly visible :/
    Am I the only person with that problem...?
  3. Yes you are right, most things are visible with naked eye. And no, you are not the only person with that problem. It could be the monitor or the GPU itself.

    Try another monitor to isolate the problem. Or you can try by changing the cables which connects the monitor. Or you may need a BIOS update.

    And two questions for you : 1. What is the make/model of PSU ? 2. Did you updated the driver for GPU ?
  4. PSU : Corsair VS 450W
    Drivers : 13.11 9.5 beta
    You mean update BIOS of MOBO or GPU?
  5. Radeon R9-270X - requires 24Ampere on +12V rail and a 500W PSU minimum

    It could run on a 450W PSU, but that VS series is not that good, so maybe its not providing enough power to run the card when on full load.

    Power consumption AMD Radeon R9-270X

    1.System in IDLE = 116W
    2.System Wattage with GPU in FULL Stress = 283W
    3.Difference (GPU load) = 167W
    4.Add average IDLE wattage ~10W
    5.Subjective obtained GPU power consumption = ~ 177 Watts

    I meant MB BIOS, gut you could update the GPU BIOS also.

    Try to borrow a PSU from someone and test with it.
  6. Best answer
    Are you sure it's not just screen tearing? Enable vsync and see if the lines appear again.

    Otherwise make sure the cable is tight on both ends, and set the card to run at 1000Mhz core clock.
  7. Well I enabled vsync in AMD CCC, but it didn't changed anything. But I checked in BF3 graphic options and I enabled vsync there. There aren't any strips now, but only in game ( also my FPS decreased from 77 to 60, and usage of GPU form 100% to 75% by afterburner)
    So in my opinion diabled vsync is the problem, but what with games like GTA4 without vsync option?
  8. GTA4 does have vsync...
  9. Oops, I didn't notice that I don't have patch which added it. Anyway, thank you for your patience guys.
  10. tomson23 said:
    I know hard to see it on that video, but with the naked eye it's clearly visible :/
    Am I the only person with that problem...?

    i have the same problem but i think u use vga cable with ur ild monitor... buy a new one and try that coz using hdmi connectoe may solve it..
  11. I have the same problem !! What is the solution ? !!!
Ask a new question

Read More

Graphics GPUs Hewlett Packard Monitors Radeon MSI-Microstar