i cant seem to get my pc to work:??:

Toggle sidebar Toggle sidebar
B

Brandon Taylor

Honorable
Dec 2, 2013
62
0
10,640
Hi ive recently build a custom atx desktop and it will not show anything on the screen, therefore i cant make out how to install anything to it.
here are the items i've used, one of them i'm not sure of because its from a local store:


    ASROCK - Z77-EXTREME4
    ASRock Z77-EXTREME4 MB, Intel Z77, 4x DDR3, 2x PCI-E 3.0, 4x SATA III, 4x USB 3.0, D-Sub, DVI, HDMI, GBLAN, ATX

    LG - CH12LS28
    LG Blu Ray Combo Drive (Blu Ray Reader, DVD Burner), 12x BD-R,16x DVDRW, BD-R/RE SL/25GB and DL/50GB Light Scribe

    G.Skill Trident X F3-2133C9D-16GTX 16GB (2x8GB) DDR3

    XSPC 120mm Xinruilian Fan 1650RPM

    Antec High Current Gamer 900W Power Supply HCG-900

    Intel Core i7 3770K

    Gigabyte GeForce GTX 650 OC 2GB

    Deepcool Frostwin CPU Cooler


:??:can any one get an answer to this mess and please. all answers will be respected.
kind regards Brandon Taylor:):??::??:
 
Solution
smorizio
hey brandon...try this and do a few checks too. first off try one ram dimm and pull the gpu and see if you can get the onboard video to post the mb splash screen. if there no video splash screen. check on the outside edge of the mb that the eight pin cpu power plug is connected. (make sure you used the black eight pin plug or the two four pin plugs that clip together into this port and not the gpu six plus two pins. make sure the motherboard setting on the 8-9 brass motherboard standoffs so that the mb not shorting out to the motherboard tray. check the power and reset cables and case buttons make sure there on the right case header pins and are not stuck in. on the back of the motherboard make sure none of the metal shield is shorting...
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
hey brandon...try this and do a few checks too. first off try one ram dimm and pull the gpu and see if you can get the onboard video to post the mb splash screen. if there no video splash screen. check on the outside edge of the mb that the eight pin cpu power plug is connected. (make sure you used the black eight pin plug or the two four pin plugs that clip together into this port and not the gpu six plus two pins. make sure the motherboard setting on the 8-9 brass motherboard standoffs so that the mb not shorting out to the motherboard tray. check the power and reset cables and case buttons make sure there on the right case header pins and are not stuck in. on the back of the motherboard make sure none of the metal shield is shorting out the mb. with the cpu make sure in lined up to the right pin one on the cpu slot and is down.
if your using an after market cooler make sure if the back plate is metal it not shorting out your mb.
 
Upvote 0 Downvote
Solution
B

Brandon Taylor

Honorable
Dec 2, 2013
62
0
10,640


thanks ill try
 
Upvote 0 Downvote
B

Brandon Taylor

Honorable
Dec 2, 2013
62
0
10,640


what part or what does the splash screen look like
and ive contacted asrock them self they said not to use the graphics card and yet still no display.
i'm starting to think its the mb or something else that using like cpu
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom