Won't power up

Iamdivinity · Dec 17, 2013

Today I started building my computer. It was my first build and I expected there to be a few problems but I hadn't ran into anything until now. I did an external build first and that went perfect. So began to put everything in the case. I got everything set in. Cords all plugged in what I was guessing was the right place that the manuals had said to put them. And when I went to turn the machine on. Nothing. Nothin happened. Even when I opened the case and tried to turn it on straight from the motherboard it did nothing. I have no clue what it could be. Any help at all would be amazing. Or if someone could point me in the right direction. I just really hope I didn't fuck anything up

junkeymonkey · Dec 17, 2013

recheck your cords and see if you missed somthing if not pull it back out and try it like you did at first. dose the psu fire up or is it dead to? if the psu is modular check them plugs in to the psu to see if there not all the in or in the right port.

Iamdivinity · Dec 17, 2013

I took it all back out and started from the beginning. I started the external build and same thing is happening. I'm getting power to the motherboard and video card but nothing is starting up.

junkeymonkey · Dec 17, 2013

tryed resetting the bios? see im not sure if the board needed to be grouned by having it mounted is some way with a standoff hole spot acting for a ground... if that was the case then it may be done. i never fired one up with out it being mounted correctly in a case . discharg the board and pull the bios battery for about 5 secs to rest the bios and retry maby someone that knows about that ground issue will check in. i could be wrong about that.

Search

Won't power up

Iamdivinity

Honorable

junkeymonkey

junkeymonkey

Polypheme

Iamdivinity

Honorable

junkeymonkey

Polypheme

TRENDING THREADS

Latest posts

Moderators online

Share this page