Sign in with
Sign up | Sign in
Your question
Solved

No display after replacing PSU. Need help!

Last response: in Graphics & Displays
Share
December 18, 2013 5:58:06 PM

I upgraded my psu to an Antec Neo Eco 620 and after installing it I do not get any display from either gpu or integrated graphics. Everything was working fine prior to installation. I've reseated the gpu and made sure all connections are tight, but no luck. What could it be?!

More about : display replacing psu

Best solution

December 18, 2013 6:01:23 PM

Hmm. You did what i would suggest. Try removing your gpu cmpletely and using the onboard, reseat your ram and check your cpu power connector. All will cause no video
Share
December 18, 2013 6:30:41 PM

06yfz450ridr said:
Hmm. You did what i would suggest. Try removing your gpu cmpletely and using the onboard, reseat your ram and check your cpu power connector. All will cause no video

I had not tried reseating ram. After that integrated graphics worked.

edit: forgot to plug the power back to gpu. Everything is working. Thank you for the help!
m
0
l
Related resources
!