Black screen after overclock Ram.

Hi, hope this is The right section.

So, without thinking and without any knowledge i tried to make my 4gb ram better.

Changed from 5xx MHz to 1600 and from 8 - 8 - 8 - 8 - 20 to 7 - 7 - 7 - 7 - 20.

After that i got black screen and bios not showing.
Screen acts like if computer is not turned on.
Anyway i can revert this? :/
5 answers Last reply Best Answer
More about black screen overclock ram
  1. Best answer
    Shut down the computer, remove the power cord, press start to discharge the capacitors, remove the cmos battery on the m/b for 15 seconds, replace battery, power up.

  2. So, startup computer while powercord is removed from computer, and then remove battery from motherboard? Is it The rond thing wich says newsun lithium battery? (Maybe dumb question)
  3. Yes. You are not "starting" the pc, you are merely getting (discharging) any residual energy from the psu capacitors. And yes, it is the lithium battery. What you are doing is resetting the cmos and removing the overclock settings from the ram.

  4. Yeessss it worked. Thank you thank you :D
  5. You are most welcome.
Ask a new question

Read More

Overclocking RAM