Newly built system, used parts, I get lights, fans, but no sounds.

rlywks

Honorable
Dec 19, 2013
9
0
10,510
My system
Motherboard: MSI MS-7380
CPU: Intel Core 2 Quad Q6600
GPU: GT240
RAM: 2GB DDR2 PC26400
HDD: 1TB Seagate Barracuda, 3TB Seagate Barracuda
PSU: SPI ATX-400PN-B204 400W

The PSU was tested on a different setup and worked perfectly, the drives were pulled from my old working system. The CPU and GPU were pulled from a friends working system, though it hadn't been run in a few months so not sure about those.

I pulled out the RAM to see if I could get some sort of memory error beep from the motherboard, but no sound was heard. My current theory is a bad motherboard. Any help in addressing this issue would be appreciated.
 
G

Guest

Guest
So, the lights and fans are working but, you don't have any sounds?
If so, the motherboard is fine and the problem most likely comes from incorrect wiring.

Make sure you've plugged the small 1 pin cables used to connect the start, reset button, usb port and audio correctly.