Sign in with
Sign up | Sign in
Your question
Solved

Sapphire 7950 Lepa 1600w power

Last response: in Graphics & Displays
Share
December 23, 2013 7:12:46 AM

I am trying to connect 6xSapphire 7950 to a LEPA 1600

The LEPA has a 6+2pin power connector for the GPU, the Sapphire has 2 6 pin connectors on it, however I am trying to figure out if all I need is to plug in the on 6 pine from the PSU to the Card, and if that is enough power?

*SAPPHIRE HD 7950 3GB GDDR5 WITH BOOST
December 23, 2013 7:19:23 AM

If it has 2 connectors, it needs both of the to operate.
m
0
l
December 23, 2013 7:20:16 AM

Plug Both Sir.
m
0
l
Related resources

Best solution

December 23, 2013 7:20:40 AM

Connect three cards to three fingers on both hands. Connect one leg to the LEPA PSU.

Turn on the power.

The coins will come out from your mouth.
Share
December 23, 2013 7:23:57 AM

huilun02 said:
Connect three cards to three fingers on both hands. Connect one leg to the LEPA PSU.

Turn on the power.

The coins will come out from your mouth.


LOL :D 
m
0
l
December 23, 2013 7:39:29 AM

So Im guessing then I need to have PCIE powered Riser as well as Aftermarket 2x6 pin powered cables
m
0
l
December 23, 2013 7:39:51 AM

huilun02 said:
Connect three cards to three fingers on both hands. Connect one leg to the LEPA PSU.

Turn on the power.

The coins will come out from your mouth.


I will try that, helpful
m
0
l
December 23, 2013 7:54:12 AM

If the card has 2x connectors, then you must connect the PSU to them both.
m
0
l
December 23, 2013 9:42:46 AM

RobCrezz said:
If the card has 2x connectors, then you must connect the PSU to them both.


So since the PSU has in 6 GPU slots and each connector has a 6+2 Pin, should I attach 2 gpu slots (6 and 6) to each GPU until i can get some adaptors to run off one?
m
0
l
!