asus striker extreme overclock ai

Toggle sidebar Toggle sidebar
F

fatty3065

Distinguished
Dec 29, 2012
26
0
18,530
core 2 quad q6700
8 gb ram
trying to use the extreme overclock software on setup and it wont let me go past 10% on overclocking cpu. What settings should I be looking at or changing to get it at 15% or 20%?
 
Solution
S
interesting chip :)
you should:
A: ) Find a lower RAM strap that works
B: ) Increase FSB term,NB,and Vcore voltage by about .03-5
C:) Raise your FSB in 25 Mhz increments until it starts to get unstable..then back off until you can adjust something and get it stable again..

I can tell you this..You don't need a ton of FSB voltage for Kentsfield/Conroe..but you do for Wolfdale/Yorkfield.
1.38v should be good for that chip..
Oh..and PLL voltage, too..Try 1.6-ish 1st..
Sort by date Sort by votes
S

schmuckley

Distinguished
BANNED
Jul 18, 2011
809
5
19,165
interesting chip :)
you should:
A: ) Find a lower RAM strap that works
B: ) Increase FSB term,NB,and Vcore voltage by about .03-5
C:) Raise your FSB in 25 Mhz increments until it starts to get unstable..then back off until you can adjust something and get it stable again..

I can tell you this..You don't need a ton of FSB voltage for Kentsfield/Conroe..but you do for Wolfdale/Yorkfield.
1.38v should be good for that chip..
Oh..and PLL voltage, too..Try 1.6-ish 1st..
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom