Hi all,
I am wondering why the IOPS "read" operation is so far from the target value, as you can see in the attached screenshots:
[img=http://s30.postimg.org/r26r6n74t/Cattura2.jpg]
I have a quite old P5K motherboard, where:
- only SATA2 3 Gbps is available
- AHCI cannot be configured (IDE only), at least without installing custom BIOS
I was not expecting a so high difference with respect to a SATA3/AHCI configuration, so my doubt is if there is something wrong. Please note that chipset drivers are updated and RAPID mode is enabled.
Thank you in advance.
Roberto
I am wondering why the IOPS "read" operation is so far from the target value, as you can see in the attached screenshots:
[img=http://s30.postimg.org/r26r6n74t/Cattura2.jpg]
I have a quite old P5K motherboard, where:
- only SATA2 3 Gbps is available
- AHCI cannot be configured (IDE only), at least without installing custom BIOS
I was not expecting a so high difference with respect to a SATA3/AHCI configuration, so my doubt is if there is something wrong. Please note that chipset drivers are updated and RAPID mode is enabled.
Thank you in advance.
Roberto