Sign in with
Sign up | Sign in
Your question

GT 610 No dispaly after driver install

Tags:
  • Drivers
  • Nvidia
  • Galaxy
  • Graphics
Last response: in Graphics & Displays
Share
December 26, 2013 8:30:29 AM

Hi everyone. I bought a NVIDIA GT 610 Galaxy 1 GB to play arma 2. I installed it and plugged it in and it worked fine with no drivers. i installed driver version 301.42 and from boot there was no display. took it out and used integrated 6150 se. worked fine. Any help? Fan on card turned on, if that helps

More about : 610 dispaly driver install

December 26, 2013 3:26:34 PM

1.Make sure your motherboard bios is up to date.
2.Use the integrated 6150se and un-install the GT 610 drivers.
3.Un-install the integrated 6150se drivers (use driver sweeper or similar program)
4. If your motherboard bios is up to date then try re-installing GT 610 drivers using the "clean install" option. If this does not work, un-install (again) the GT 610 drivers and try a slightly older driver version (until you find one that works)
m
0
l
!