Sign in with
Sign up | Sign in
Your question

New Pc won't display images/beep/no usb power/all fans work

Tags:
  • USB
  • Computers
  • Systems
  • Power
  • Displays
Last response: in Systems
Share
December 26, 2013 11:52:52 AM

Just put my computer together; http://pcpartpicker.com/user/shadowlyr/saved/3f2p
and when I went to pull up the bios and move my os to this new system I noticed that it isn't pulling any display. At first I thought I had my gpu mounted incorrectly, so I went and made sure that was seated correctly, then went and checked the ram and processor making sure they're plugged in correctly. I have checked and all the wires are connected that need to be and still am not getting any display, any motherboard beeps, and no usb power. I know the motherboard is getting power though because the gpu fan, processor fan, and 2 case fans are all working. Any help would be really appreciated

More about : display images beep usb power fans work

December 26, 2013 11:55:53 AM

is the eight pin power plug connected and the mb sitting on the brass standoffs so it not shorting out?? is the front case headers on right and the reset button not pressed in so the mb stuck on reset???
m
0
l
December 26, 2013 12:40:36 PM

Yes the 8 pin power plug is connected, the mb is sitting on all 9 brass standoffs, the front case headers are on right and no the reset button isn't pressed in.
m
0
l
Related resources
December 26, 2013 12:52:16 PM

try the mb outside the case with one ram dimm and the gpu. make sure all the power plugs on the gpu are plugged in. could be a bad fan or the mb shorting to the case. or bad case fan.
m
0
l
December 26, 2013 1:10:13 PM

I just tried that, checking the power plugs and all, and it still isn't showing any display or any beeps.
m
0
l
December 26, 2013 1:24:21 PM

if you have a volt meter jumper the grren wire on the power supply to the black wire and then check your voltages on the power supply or try a test power supply. if not check under the cpu for bent pins..could be a dead motherboard or cpu.
m
0
l
December 26, 2013 1:34:12 PM

There were a few bent pins on the processor when I received it (was bought brand new) and I googled how to straighten them out, and used a credit card and toothpick until all the pins were straightened out. Do you think it's possible I got a faulty processor and should call newegg or AMD and get it replaced?
m
0
l
December 26, 2013 2:42:43 PM

I just went and checked through all of those. The only one I am not sure about is the processor being installed correctly due to the way it had bent pins when I opened it. I have straightened them out but that seems like the error would most likely be there?
m
0
l
!