- Dec 27, 2013
- 14
- 0
- 10,510
two h90's and a h100i in a Corsair 750D
- Thread starter Erik Feher
- Start date
Solution
Please drop me a mail here when you have it all put together, I may do the same thing...Thanks much and good luck 
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
- Dec 27, 2013
- 14
- 0
- 10,510
- Dec 27, 2013
- 14
- 0
- 10,510
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
Interesting, let me check this out a bit. I read about these g10s a couple weeks ago but that's it. How are they handling the VRMs and RAM?
- Dec 27, 2013
- 14
- 0
- 10,510
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
I don't see any reason all of that stuff would not fit in a 750D, that thing is a monster of a case, perhaps one of the few cases you could pull it off. There are going to be hoses going everywhere, not like a conventional loop.
One thing I caught was this g10 takes up 3 slots, what MB are you using? The reviews I just read are pretty impressive indeed. The set up seems to fall right between stock cooling and a full cover block, would like to see a comparison of a g10 to a good vender solution, like the Gigabyte or MSI coolers. What kind of 780s do you have?
One thing I caught was this g10 takes up 3 slots, what MB are you using? The reviews I just read are pretty impressive indeed. The set up seems to fall right between stock cooling and a full cover block, would like to see a comparison of a g10 to a good vender solution, like the Gigabyte or MSI coolers. What kind of 780s do you have?
- Dec 27, 2013
- 14
- 0
- 10,510
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
Are they EVGA? What your doing is pretty cool, let me work out some stuff on this, have you read any AIO reviews? What do you figure, about $310-320 in parts?
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
- Dec 27, 2013
- 14
- 0
- 10,510
- Dec 27, 2013
- 14
- 0
- 10,510
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
Oh stupid me of course the h110i is for the CPU, sorry. Glad to hear they are EVGA, it gets rid of any warranty issues. The ST looks like it has 2 slots between the 2 card slots, so they should fit OK, in theory of course. I am thinking about the pluming of the tubes. Would it be better to connect all of the parts and run one loop or just let them run on their own.
The CM Glacier 240L is an expandable AIO loop, and much better pump and radiator than the H100i is. Has me thinking about how to wire up the pumps and fans also, your case even looks like it may accommodate the X40 and X60.
You really have me wondering on this, it looks like a great way to WC a graphics card without selling the house to pay for.
The CM Glacier 240L is an expandable AIO loop, and much better pump and radiator than the H100i is. Has me thinking about how to wire up the pumps and fans also, your case even looks like it may accommodate the X40 and X60.
You really have me wondering on this, it looks like a great way to WC a graphics card without selling the house to pay for.
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
And also if one of the pumps on the 780 fails but the CPU pump keeps working, how are you going to fail-safe to a shutdown?
- Dec 27, 2013
- 14
- 0
- 10,510
If im right the gpu's have an overheat protection so if the pump on the h90s fails the gpu is going to shut down. In theory I like the price too $220+the fans maybe $45 is a good price if the temperatures go down from 85 celsius to 48 celsius under load and the performance goes up by 5-10 % in the same time.
I like the price too $220+the fans maybe $45 is a good price if the temperatures go down from 85 celsius to 48 celsius under load and the performance goes up by 5-10 % in the same time.- Dec 27, 2013
- 14
- 0
- 10,510
I want it to be 3 loops, and i have the h100i already in the system. The 240L is beter but i got the h100i for "free" my friend had a pc shop and it was a b-day present 
my friend had a pc shop and it was a b-day present - Dec 27, 2013
- 14
- 0
- 10,510
And for the power i will get a SCYTHE KM03 - BK Kaze Master Pro it has 6 fan support so i can run the rad's in push/pull
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
That all sounds Great ! I have looked at some of the Scythe fan/temp controllers and really think they are very cool, the way they work and what they do. It sounds like you have it all worked out. Ran across this write up just now, perhaps you would like it, it has some thermal images of what is going on with a card that has one of these g10s, they tested both Titan and 290x..
http://www.pugetsystems.com/labs/articles/NZXT-Kraken-G10-Review-527/
http://www.pugetsystems.com/labs/articles/NZXT-Kraken-G10-Review-527/
- Dec 27, 2013
- 14
- 0
- 10,510
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
Please drop me a mail here when you have it all put together, I may do the same thing...Thanks much and good luck
- Dec 27, 2013
- 14
- 0
- 10,510
The h90's are geting replaced with h75's so i can fit both rads in the front of the case (so i dont have to mess up with the 140mm size) i will get a litlebit worse cooling with the 120mm rads but it will look better.
- Dec 27, 2013
- 14
- 0
- 10,510
Orderd h75's and g10's now just need to ship (to F...... EUROPE)
so maybe 3 weeks also cable sleeve's orderd for watercoolin tubes co it will match my pc. ^^
(to F...... EUROPE)so maybe 3 weeks
also cable sleeve's orderd for watercoolin tubes co it will match my pc. ^^
endeavour37a
Honorable
- Feb 25, 2013
- 1,839
- 1
- 12,460
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 16
Facebook
Twitter
Instagram