New Build, No Display on monitor

dropthebass · Dec 28, 2013

So this is my first time building my own PC, and i got all the parts and put it together. I had a couple issues to work out, but finally got to where i got no beeps, but i still got no display. My setup is:

ASRock z75 Extreme 4 Motherboard
GeForce GTX 660 Twin Frozr Graphics card (i tried with and without the graphics card)
Intel i5-3470 CPU
64 MB WD Blue Desktop Hard Drive

Again this is my first new build so i might not understand everything but i would appreciate any help.

dropthebass · Dec 28, 2013

it says 64 MB Cache, and the motherboard is Asrock Z75 Extreme 4. Memory is 2 sticks of G Skill Ripjaws 4 GB (i have them in the a1 b1 slots)

smorizio · Dec 28, 2013

make sure the mb standoffs were used so the mb not grounding out. on the edge of the mb is an eight pin power plug make sure that filled. check with a video cable to see if the mb booting from the onboard video port.

Jared Jensen · Dec 28, 2013

dropthebass :

try using only one ram stick and make sure all the connectors are plugged in. does the CPU fan spin? if it does then your mobo is getting power. also, what PSU do you have?

dropthebass · Dec 28, 2013

do you know where the onboard video port is?

dropthebass · Dec 28, 2013

Oh i've been using the onboard video port, and yes the CPU fan works. Also what is the PSU?

dropthebass · Dec 28, 2013

Power supply is the XFX pro 650 W

dropthebass · Dec 28, 2013

i removed the gpu to make it simpler. should i put the gpu back in and try the gpu video port to see if i get any display?

dropthebass · Dec 28, 2013

*Update* It now turns on when i flip on the power switch without pressing the power button

dropthebass · Dec 28, 2013

Like i said i am not getting the POST beep for the bios when it comes on so there must be something wrong with the Bios or CMOS. any suggestions?

smorizio · Dec 28, 2013

new mb dont beep anymore unless you put a mb speaker on the mb.

dropthebass · Dec 28, 2013

i put the speaker on. And how do i update the bios driver

dropthebass · Dec 28, 2013

I would probably need a disk to update the bios but i have no display

smorizio · Dec 28, 2013

did you make sure the 8 pin power is conencted on the edge of the mb and you used the 4 plus 4 or eight pin cable and not the six plus two cable. check that the cpu is seated right and there no bent pins under the cpu. check that the io shield and if your using a 3 party cpu cooler the back plate if it not plastic is not shorting the mb out. unplug the usb and fans to see if a case fan or the usb cable is miss wired.

dropthebass · Dec 29, 2013

yes yes all that's fine. i made the system simpler and even removed the RAM and the system did the same thing when it turned on, still no beeps. I forgot to mention the mobo has an error code of 00 displayed which means "not used" according to the manual. I had a CPU/socket problem before and got 5 beeps but now i suspect the motherboard is fried because i am getting no beeps. I am going to return the mobo tomorrow and get a new one

Search

New Build, No Display on monitor

dropthebass

Honorable

dropthebass

Honorable

smorizio

Titan

Jared Jensen

Honorable

dropthebass

Honorable

dropthebass

Honorable

dropthebass

Honorable

dropthebass

Honorable

dropthebass

Honorable

dropthebass

Honorable

smorizio

Titan

dropthebass

Honorable

dropthebass

Honorable

smorizio

Titan

dropthebass

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page