- Jun 8, 2013
- 13
- 0
- 10,520
I got a new GPU for Christmas, the Radeon HD 7870 (Sapphire)
I want to refresh the Windows Experience Index, but everytime I try it it gives me "Could not measure video playback performance"
I googled around and I found that there's a WinSAT folder, and everything there should by default open with Windows Media Player.
I've tried to set the default to WMP, but when I press OK, it changes to a different media player. It was VLC, I uninstalled that, now it's Quicktime. I also tried to change the defaults through control panel.
If it helps, there was a file called WinSAT which read this:
Does anyone know what's going on?
I want to refresh the Windows Experience Index, but everytime I try it it gives me "Could not measure video playback performance"
I googled around and I found that there's a WinSAT folder, and everything there should by default open with Windows Media Player.
I've tried to set the default to WMP, but when I press OK, it changes to a different media player. It was VLC, I uninstalled that, now it's Quicktime. I also tried to change the defaults through control panel.
If it helps, there was a file called WinSAT which read this:
399315 (1140) - winsat\logging.cpp:0815: --- START 2013\12\25 10:31:05 ---
399315 (1140) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 3ef8ce2a-9896-4a33-8ded-8a70882b7c71
399315 (1140) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
399346 (1140) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
399393 (1140) - winsat\main.cpp:4585: Watch dog system enabled
399393 (1140) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
399752 (1140) - winsat\main.cpp:2490: > DWM Running.
400033 (1140) - winsat\main.cpp:2497: > turning off DWM.
400033 (1140) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
400033 (1140) - winsat\main.cpp:2793: > power policy saved.
400095 (1140) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
400095 (1140) - winsat\main.cpp:2814: > power policy set to maximum.
400407 (1140) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
400407 (1140) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
400407 (1140) - winsat\main.cpp:1775: > Run Assessment features
400579 (1140) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
400828 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
400828 (1140) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
400828 (1140) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
400828 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
401047 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401047 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
401265 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401281 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
401515 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401515 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
401733 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401733 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
401967 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401967 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
402201 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402201 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
402435 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402435 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
402685 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402685 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
402919 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402919 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
403153 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
403153 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
403387 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
403387 (1140) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
403590 (1140) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
403590 (1140) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
403605 (1140) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
403621 (1140) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
403621 (1140) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
403621 (1140) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
403621 (1140) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
403668 (1140) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
403668 (1140) - winsat\main.cpp:2855: > Power state restored.
403668 (1140) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
403668 (1140) - winsat\main.cpp:2896: > Composition restarted
403668 (1140) - winsat\watchdog.cpp:0311: Watch dog system shutdown
403668 (1140) - winsat\main.cpp:4909: > exit value = 1.
411156 (6280) - winsat\logging.cpp:0815: --- START 2013\12\25 10:31:16 ---
411171 (6280) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 0c201e5c-d991-45b2-902b-559121f1081e
411171 (6280) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
411171 (6280) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
411203 (6280) - winsat\main.cpp:4585: Watch dog system enabled
411203 (6280) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
411561 (6280) - winsat\main.cpp:2490: > DWM Running.
411842 (6280) - winsat\main.cpp:2497: > turning off DWM.
412107 (6280) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
412123 (6280) - winsat\main.cpp:2793: > power policy saved.
412170 (6280) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
412170 (6280) - winsat\main.cpp:2814: > power policy set to maximum.
412466 (6280) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
412466 (6280) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
412466 (6280) - winsat\main.cpp:1775: > Run Assessment features
412638 (6280) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
412872 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
412887 (6280) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
412887 (6280) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
412887 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
413121 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413121 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
413387 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413402 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
413621 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413621 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
413855 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413870 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
414089 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414104 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
414338 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414338 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
414572 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414572 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
414791 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414791 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
415040 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
415040 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
415259 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
415274 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
415493 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
415493 (6280) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
415649 (6280) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
415649 (6280) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
415664 (6280) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
415664 (6280) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
415664 (6280) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
415664 (6280) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
415664 (6280) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
415711 (6280) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
415711 (6280) - winsat\main.cpp:2855: > Power state restored.
415711 (6280) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
415711 (6280) - winsat\main.cpp:2896: > Composition restarted
415711 (6280) - winsat\watchdog.cpp:0311: Watch dog system shutdown
415711 (6280) - winsat\main.cpp:4909: > exit value = 1.
31151293 (10736) - winsat\logging.cpp:0815: --- START 2013\12\29 22:11:38 ---
31151293 (10736) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 95b97998-1b52-4c35-a36d-d73a4fc156c6
31151356 (10736) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31151371 (10736) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31151418 (10736) - winsat\main.cpp:4585: Watch dog system enabled
31151418 (10736) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31151808 (10736) - winsat\main.cpp:2490: > DWM Running.
31152214 (10736) - winsat\main.cpp:2497: > turning off DWM.
31152229 (10736) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31152229 (10736) - winsat\main.cpp:2793: > power policy saved.
31152292 (10736) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31152292 (10736) - winsat\main.cpp:2814: > power policy set to maximum.
31152635 (10736) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31152635 (10736) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31152635 (10736) - winsat\main.cpp:1775: > Run Assessment features
31152791 (10736) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31153165 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31153181 (10736) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31153181 (10736) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31153181 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31153462 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31153462 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31153742 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31153742 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31154023 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154023 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31154304 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154304 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31154585 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154585 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31154866 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154866 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31155146 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155146 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31155427 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155427 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31155708 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155708 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31155989 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155989 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31156270 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31156270 (10736) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31156457 (10736) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31156457 (10736) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31156472 (10736) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31156472 (10736) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31156472 (10736) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31156472 (10736) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31156472 (10736) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31156519 (10736) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31156519 (10736) - winsat\main.cpp:2855: > Power state restored.
31156519 (10736) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31156535 (10736) - winsat\main.cpp:2896: > Composition restarted
31156535 (10736) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31156535 (10736) - winsat\main.cpp:4909: > exit value = 1.
31249823 (7244) - winsat\logging.cpp:0815: --- START 2013\12\29 22:13:16 ---
31249823 (7244) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent adeb1c91-6300-4514-a1fc-1318edb04917
31249823 (7244) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31249839 (7244) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31249870 (7244) - winsat\main.cpp:4585: Watch dog system enabled
31249870 (7244) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31250229 (7244) - winsat\main.cpp:2490: > DWM Running.
31250869 (7244) - winsat\main.cpp:2497: > turning off DWM.
31251259 (7244) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31251259 (7244) - winsat\main.cpp:2793: > power policy saved.
31251321 (7244) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31251321 (7244) - winsat\main.cpp:2814: > power policy set to maximum.
31251617 (7244) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31251617 (7244) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31251617 (7244) - winsat\main.cpp:1775: > Run Assessment features
31251773 (7244) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31252054 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252054 (7244) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31252054 (7244) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31252054 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31252319 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252319 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31252600 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252600 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31252865 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252865 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31253177 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31253177 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31253458 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31253458 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31253723 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31253723 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31254004 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254004 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31254269 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254269 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31254535 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254535 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31254815 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254815 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31255081 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31255081 (7244) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31255221 (7244) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31255221 (7244) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31255237 (7244) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31255237 (7244) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31255237 (7244) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31255237 (7244) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31255237 (7244) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31255283 (7244) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31255283 (7244) - winsat\main.cpp:2855: > Power state restored.
31255283 (7244) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31255299 (7244) - winsat\main.cpp:2896: > Composition restarted
31255299 (7244) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31255299 (7244) - winsat\main.cpp:4909: > exit value = 1.
31465354 (3216) - winsat\logging.cpp:0815: --- START 2013\12\29 22:16:52 ---
31465354 (3216) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 599f85cc-e25f-414f-9fa5-46e1896c35bd
31465354 (3216) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31465354 (3216) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31465386 (3216) - winsat\main.cpp:4585: Watch dog system enabled
31465386 (3216) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31465760 (3216) - winsat\main.cpp:2490: > DWM Running.
31466134 (3216) - winsat\main.cpp:2497: > turning off DWM.
31466493 (3216) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31466493 (3216) - winsat\main.cpp:2793: > power policy saved.
31466571 (3216) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31466571 (3216) - winsat\main.cpp:2814: > power policy set to maximum.
31466868 (3216) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31466868 (3216) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31466868 (3216) - winsat\main.cpp:1775: > Run Assessment features
31467055 (3216) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31467336 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31467336 (3216) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31467336 (3216) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31467336 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31467616 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31467616 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31467882 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31467882 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31468147 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468147 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31468412 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468412 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31468693 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468693 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31468958 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468958 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31469239 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31469239 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31469504 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31469504 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31469769 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31469769 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31470034 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31470034 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31470315 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31470315 (3216) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31470440 (3216) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31470440 (3216) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31470456 (3216) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31470456 (3216) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31470456 (3216) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31470456 (3216) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31470471 (3216) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31470518 (3216) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31470518 (3216) - winsat\main.cpp:2855: > Power state restored.
31470518 (3216) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31470518 (3216) - winsat\main.cpp:2896: > Composition restarted
31470518 (3216) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31470518 (3216) - winsat\main.cpp:4909: > exit value = 1.
31516835 (10460) - winsat\logging.cpp:0815: --- START 2013\12\29 22:17:43 ---
31516835 (10460) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 716e57e3-79ec-4b41-839f-31b4c04138ff
31516850 (10460) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31516881 (10460) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31516913 (10460) - winsat\main.cpp:4585: Watch dog system enabled
31516913 (10460) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31517240 (10460) - winsat\main.cpp:2490: > DWM Running.
31517599 (10460) - winsat\main.cpp:2497: > turning off DWM.
31517958 (10460) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31517958 (10460) - winsat\main.cpp:2793: > power policy saved.
31518020 (10460) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31518020 (10460) - winsat\main.cpp:2814: > power policy set to maximum.
31518317 (10460) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31518317 (10460) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31518317 (10460) - winsat\main.cpp:1775: > Run Assessment features
31518504 (10460) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31518785 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31518785 (10460) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31518785 (10460) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31518785 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31519066 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519066 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31519331 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519331 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31519596 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519596 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31519877 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519877 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31520158 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520158 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31520423 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520423 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31520704 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520704 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31520969 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520969 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31521234 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31521234 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31521499 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31521515 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31521780 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31521780 (10460) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31521920 (10460) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31521920 (10460) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31521936 (10460) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31521936 (10460) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31521936 (10460) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31521936 (10460) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31521936 (10460) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31521998 (10460) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31521998 (10460) - winsat\main.cpp:2855: > Power state restored.
31521998 (10460) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31521998 (10460) - winsat\main.cpp:2896: > Composition restarted
31521998 (10460) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31521998 (10460) - winsat\main.cpp:4909: > exit value = 1.
399315 (1140) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 3ef8ce2a-9896-4a33-8ded-8a70882b7c71
399315 (1140) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
399346 (1140) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
399393 (1140) - winsat\main.cpp:4585: Watch dog system enabled
399393 (1140) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
399752 (1140) - winsat\main.cpp:2490: > DWM Running.
400033 (1140) - winsat\main.cpp:2497: > turning off DWM.
400033 (1140) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
400033 (1140) - winsat\main.cpp:2793: > power policy saved.
400095 (1140) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
400095 (1140) - winsat\main.cpp:2814: > power policy set to maximum.
400407 (1140) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
400407 (1140) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
400407 (1140) - winsat\main.cpp:1775: > Run Assessment features
400579 (1140) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
400828 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
400828 (1140) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
400828 (1140) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
400828 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
401047 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401047 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
401265 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401281 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
401515 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401515 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
401733 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401733 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
401967 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
401967 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
402201 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402201 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
402435 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402435 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
402685 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402685 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
402919 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
402919 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
403153 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
403153 (1140) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
403387 (1140) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
403387 (1140) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
403590 (1140) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
403590 (1140) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
403605 (1140) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
403621 (1140) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
403621 (1140) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
403621 (1140) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
403621 (1140) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
403668 (1140) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
403668 (1140) - winsat\main.cpp:2855: > Power state restored.
403668 (1140) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
403668 (1140) - winsat\main.cpp:2896: > Composition restarted
403668 (1140) - winsat\watchdog.cpp:0311: Watch dog system shutdown
403668 (1140) - winsat\main.cpp:4909: > exit value = 1.
411156 (6280) - winsat\logging.cpp:0815: --- START 2013\12\25 10:31:16 ---
411171 (6280) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 0c201e5c-d991-45b2-902b-559121f1081e
411171 (6280) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
411171 (6280) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
411203 (6280) - winsat\main.cpp:4585: Watch dog system enabled
411203 (6280) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
411561 (6280) - winsat\main.cpp:2490: > DWM Running.
411842 (6280) - winsat\main.cpp:2497: > turning off DWM.
412107 (6280) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
412123 (6280) - winsat\main.cpp:2793: > power policy saved.
412170 (6280) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
412170 (6280) - winsat\main.cpp:2814: > power policy set to maximum.
412466 (6280) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
412466 (6280) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
412466 (6280) - winsat\main.cpp:1775: > Run Assessment features
412638 (6280) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
412872 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
412887 (6280) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
412887 (6280) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
412887 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
413121 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413121 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
413387 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413402 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
413621 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413621 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
413855 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
413870 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
414089 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414104 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
414338 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414338 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
414572 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414572 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
414791 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
414791 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
415040 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
415040 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
415259 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
415274 (6280) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
415493 (6280) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
415493 (6280) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
415649 (6280) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
415649 (6280) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
415664 (6280) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
415664 (6280) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
415664 (6280) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
415664 (6280) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
415664 (6280) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
415711 (6280) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
415711 (6280) - winsat\main.cpp:2855: > Power state restored.
415711 (6280) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
415711 (6280) - winsat\main.cpp:2896: > Composition restarted
415711 (6280) - winsat\watchdog.cpp:0311: Watch dog system shutdown
415711 (6280) - winsat\main.cpp:4909: > exit value = 1.
31151293 (10736) - winsat\logging.cpp:0815: --- START 2013\12\29 22:11:38 ---
31151293 (10736) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 95b97998-1b52-4c35-a36d-d73a4fc156c6
31151356 (10736) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31151371 (10736) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31151418 (10736) - winsat\main.cpp:4585: Watch dog system enabled
31151418 (10736) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31151808 (10736) - winsat\main.cpp:2490: > DWM Running.
31152214 (10736) - winsat\main.cpp:2497: > turning off DWM.
31152229 (10736) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31152229 (10736) - winsat\main.cpp:2793: > power policy saved.
31152292 (10736) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31152292 (10736) - winsat\main.cpp:2814: > power policy set to maximum.
31152635 (10736) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31152635 (10736) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31152635 (10736) - winsat\main.cpp:1775: > Run Assessment features
31152791 (10736) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31153165 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31153181 (10736) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31153181 (10736) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31153181 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31153462 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31153462 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31153742 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31153742 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31154023 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154023 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31154304 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154304 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31154585 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154585 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31154866 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31154866 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31155146 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155146 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31155427 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155427 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31155708 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155708 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31155989 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31155989 (10736) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31156270 (10736) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31156270 (10736) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31156457 (10736) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31156457 (10736) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31156472 (10736) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31156472 (10736) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31156472 (10736) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31156472 (10736) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31156472 (10736) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31156519 (10736) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31156519 (10736) - winsat\main.cpp:2855: > Power state restored.
31156519 (10736) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31156535 (10736) - winsat\main.cpp:2896: > Composition restarted
31156535 (10736) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31156535 (10736) - winsat\main.cpp:4909: > exit value = 1.
31249823 (7244) - winsat\logging.cpp:0815: --- START 2013\12\29 22:13:16 ---
31249823 (7244) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent adeb1c91-6300-4514-a1fc-1318edb04917
31249823 (7244) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31249839 (7244) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31249870 (7244) - winsat\main.cpp:4585: Watch dog system enabled
31249870 (7244) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31250229 (7244) - winsat\main.cpp:2490: > DWM Running.
31250869 (7244) - winsat\main.cpp:2497: > turning off DWM.
31251259 (7244) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31251259 (7244) - winsat\main.cpp:2793: > power policy saved.
31251321 (7244) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31251321 (7244) - winsat\main.cpp:2814: > power policy set to maximum.
31251617 (7244) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31251617 (7244) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31251617 (7244) - winsat\main.cpp:1775: > Run Assessment features
31251773 (7244) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31252054 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252054 (7244) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31252054 (7244) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31252054 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31252319 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252319 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31252600 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252600 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31252865 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31252865 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31253177 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31253177 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31253458 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31253458 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31253723 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31253723 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31254004 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254004 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31254269 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254269 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31254535 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254535 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31254815 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31254815 (7244) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31255081 (7244) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31255081 (7244) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31255221 (7244) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31255221 (7244) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31255237 (7244) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31255237 (7244) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31255237 (7244) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31255237 (7244) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31255237 (7244) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31255283 (7244) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31255283 (7244) - winsat\main.cpp:2855: > Power state restored.
31255283 (7244) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31255299 (7244) - winsat\main.cpp:2896: > Composition restarted
31255299 (7244) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31255299 (7244) - winsat\main.cpp:4909: > exit value = 1.
31465354 (3216) - winsat\logging.cpp:0815: --- START 2013\12\29 22:16:52 ---
31465354 (3216) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 599f85cc-e25f-414f-9fa5-46e1896c35bd
31465354 (3216) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31465354 (3216) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31465386 (3216) - winsat\main.cpp:4585: Watch dog system enabled
31465386 (3216) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31465760 (3216) - winsat\main.cpp:2490: > DWM Running.
31466134 (3216) - winsat\main.cpp:2497: > turning off DWM.
31466493 (3216) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31466493 (3216) - winsat\main.cpp:2793: > power policy saved.
31466571 (3216) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31466571 (3216) - winsat\main.cpp:2814: > power policy set to maximum.
31466868 (3216) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31466868 (3216) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31466868 (3216) - winsat\main.cpp:1775: > Run Assessment features
31467055 (3216) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31467336 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31467336 (3216) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31467336 (3216) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31467336 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31467616 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31467616 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31467882 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31467882 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31468147 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468147 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31468412 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468412 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31468693 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468693 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31468958 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31468958 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31469239 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31469239 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31469504 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31469504 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31469769 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31469769 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31470034 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31470034 (3216) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31470315 (3216) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31470315 (3216) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31470440 (3216) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31470440 (3216) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31470456 (3216) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31470456 (3216) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31470456 (3216) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31470456 (3216) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31470471 (3216) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31470518 (3216) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31470518 (3216) - winsat\main.cpp:2855: > Power state restored.
31470518 (3216) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31470518 (3216) - winsat\main.cpp:2896: > Composition restarted
31470518 (3216) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31470518 (3216) - winsat\main.cpp:4909: > exit value = 1.
31516835 (10460) - winsat\logging.cpp:0815: --- START 2013\12\29 22:17:43 ---
31516835 (10460) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 716e57e3-79ec-4b41-839f-31b4c04138ff
31516850 (10460) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
31516881 (10460) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
31516913 (10460) - winsat\main.cpp:4585: Watch dog system enabled
31516913 (10460) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
31517240 (10460) - winsat\main.cpp:2490: > DWM Running.
31517599 (10460) - winsat\main.cpp:2497: > turning off DWM.
31517958 (10460) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31517958 (10460) - winsat\main.cpp:2793: > power policy saved.
31518020 (10460) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31518020 (10460) - winsat\main.cpp:2814: > power policy set to maximum.
31518317 (10460) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
31518317 (10460) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
31518317 (10460) - winsat\main.cpp:1775: > Run Assessment features
31518504 (10460) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
31518785 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31518785 (10460) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31518785 (10460) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
31518785 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31519066 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519066 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31519331 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519331 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31519596 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519596 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31519877 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31519877 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31520158 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520158 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
31520423 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520423 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
31520704 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520704 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
31520969 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31520969 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31521234 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31521234 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
31521499 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31521515 (10460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
31521780 (10460) - d3d\dx9misc.cpp:1030: Error: Unable to start the Kernel Event Tracing Log
31521780 (10460) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
31521920 (10460) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0x80070070 == ERROR_DISK_FULL
31521920 (10460) - media\mediaerror.cpp:0095: Error: Failed to start NT Kernel Logger.
31521936 (10460) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
31521936 (10460) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
31521936 (10460) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
31521936 (10460) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
31521936 (10460) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
31521998 (10460) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
31521998 (10460) - winsat\main.cpp:2855: > Power state restored.
31521998 (10460) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
31521998 (10460) - winsat\main.cpp:2896: > Composition restarted
31521998 (10460) - winsat\watchdog.cpp:0311: Watch dog system shutdown
31521998 (10460) - winsat\main.cpp:4909: > exit value = 1.
Does anyone know what's going on?
Facebook
Twitter
Instagram