When i start up my computer, it won't start and gives me this message: "overclocking failed please enter setup to re-configure your system". I've gotten these messages in the past a few times. I've just booted the PC and it has worked, this time it doesn't.
I havn't overclocked or touched the BIOS settings at all after installing windows ~6months ago.
I've reset BIOS settings, cleared CMOS with jumpers, took out the battery for a few mins, tried different RAM voltages. Nothing has worked thus far. It just gives me the same error message over and over again.
Here's my PC specs:
SEAGATE BARRACUDA 1TB 3.5" SATA3 7.2K 64MB
Gigabyte GTX770 2GB PCI-E OC
ASUS DRW-24B5ST 24X DVDRW
KINGSTON V300 120GB SSD 450/450Mb/s
KINGSTON HYPERX 8GB 1600MHZ DDR3 (2x4GB)
Intel i5-4670K 3.40GHz 6M
ASUS Z87-K LGA1150 Intel Z87 4xDDR3
ANTEC KUHLER H2O 620 1366/1156/775/AM3/2
CORSAIR Builder Series CX 600 Watt 80+
Thanks in advance!
I havn't overclocked or touched the BIOS settings at all after installing windows ~6months ago.
I've reset BIOS settings, cleared CMOS with jumpers, took out the battery for a few mins, tried different RAM voltages. Nothing has worked thus far. It just gives me the same error message over and over again.
Here's my PC specs:
SEAGATE BARRACUDA 1TB 3.5" SATA3 7.2K 64MB
Gigabyte GTX770 2GB PCI-E OC
ASUS DRW-24B5ST 24X DVDRW
KINGSTON V300 120GB SSD 450/450Mb/s
KINGSTON HYPERX 8GB 1600MHZ DDR3 (2x4GB)
Intel i5-4670K 3.40GHz 6M
ASUS Z87-K LGA1150 Intel Z87 4xDDR3
ANTEC KUHLER H2O 620 1366/1156/775/AM3/2
CORSAIR Builder Series CX 600 Watt 80+
Thanks in advance!