My system spec
i5-3570K | GA-B75M-D3H | 2x 4GB Hyper X Genesis | WD Black + 1tb | Gigabyte GeForce GTX 660 windforce OC | Silver stone RL01 | Silencer Mk III 400W Modular | Razer abyssus | 8.1 pro 64
Disk setup AHCI
First Primary hard drive
WD3200BEKT 320gb 2.5in WD black
Single partition. But in disk manager it shows its reserved partition around 350mb other than main C.
In C only 60gb is used. Windows 8.1 Pro 64bit with all updates installed. I also have kaspersky 2014 internet security which i disabled while cloning.
OS history. I installed windows 8 pro 64 bit and upgraded to 8.1 online.
Additional hard drive
Toshiba 1tb 3.5in
Data. No partitioning hence its shows only D drive.
SSD
Seagate 600 240GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820248016
My Plan:
Clone the WD3200BEKT with Seagate 600 240gb and place seagate ssd in the place of my WD3200BEKT
Software used for cloning:
EaseUS to do backup free (v6.1)
What i did first
I used a usb enclosure to clone my primary disk WD 320gb to seagate. With in easeus I get to adjust the partition size. It gave me unneeded 80gb for reserved partition so what i did is to drag it to minimum (which was under 400mb) and extended the C drive. Clone was sucess after 40min or so. Then i removed Wd out of the system and placed the seagate internally on the same port.
I got a error which in attached photo.
What i did again?
I tried cloning by connecting SSD in internal SATA port I got the below error. This time i let 1gb for reserve partition.
Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc0000225
[ A text saying I should use recovery tools on my installation media to fix the issue. ]
Press Enter to try again
Press F8 for Start-up Settings
Press Esc for UEFI Firmware Settings
Both time i checked the optimize for SSD tick box
Currently i'm using with my old setup with out SSD.
Please help me swap my drive with SSD
please help me what went wrong? Can i try seagate disk wizard instead of easeUS?
I don't want to freshly install OS also i don't have windows 8 DVD or any material. I don't even have the serial.
i5-3570K | GA-B75M-D3H | 2x 4GB Hyper X Genesis | WD Black + 1tb | Gigabyte GeForce GTX 660 windforce OC | Silver stone RL01 | Silencer Mk III 400W Modular | Razer abyssus | 8.1 pro 64
Disk setup AHCI
First Primary hard drive
WD3200BEKT 320gb 2.5in WD black
Single partition. But in disk manager it shows its reserved partition around 350mb other than main C.
In C only 60gb is used. Windows 8.1 Pro 64bit with all updates installed. I also have kaspersky 2014 internet security which i disabled while cloning.
OS history. I installed windows 8 pro 64 bit and upgraded to 8.1 online.
Additional hard drive
Toshiba 1tb 3.5in
Data. No partitioning hence its shows only D drive.
SSD
Seagate 600 240GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820248016
My Plan:
Clone the WD3200BEKT with Seagate 600 240gb and place seagate ssd in the place of my WD3200BEKT
Software used for cloning:
EaseUS to do backup free (v6.1)
What i did first
I used a usb enclosure to clone my primary disk WD 320gb to seagate. With in easeus I get to adjust the partition size. It gave me unneeded 80gb for reserved partition so what i did is to drag it to minimum (which was under 400mb) and extended the C drive. Clone was sucess after 40min or so. Then i removed Wd out of the system and placed the seagate internally on the same port.
I got a error which in attached photo.
What i did again?
I tried cloning by connecting SSD in internal SATA port I got the below error. This time i let 1gb for reserve partition.
Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc0000225
[ A text saying I should use recovery tools on my installation media to fix the issue. ]
Press Enter to try again
Press F8 for Start-up Settings
Press Esc for UEFI Firmware Settings
Both time i checked the optimize for SSD tick box
Currently i'm using with my old setup with out SSD.
Please help me swap my drive with SSD
please help me what went wrong? Can i try seagate disk wizard instead of easeUS?
I don't want to freshly install OS also i don't have windows 8 DVD or any material. I don't even have the serial.