Red DRAM LED Light BLINKS ONCE

iVoltage55

Honorable
Nov 25, 2013
9
0
10,510
Hey all, I have encountered a problem whist re-building my pc. I got a new case for Christmas and took all the parts and transferred to new case. When pressing the ON button, the DRAM light blinks once and the PC stays on. Fans spinning, Fan LED on, although no display
 
If it's an Asus board, that probably means the RAM is okay (the light stays on if it isn't).
Reseat any / all connectors. Make sure the CPU power cable is plugged in. Did you mount the motherboard on standoffs OR raised bumps molded into the case (but not both), and only put a standoff where there is a mounting hole?
 

iVoltage55

Honorable
Nov 25, 2013
9
0
10,510


Yes, it is an ASUS board. And I mounted via standoffs
 

iVoltage55

Honorable
Nov 25, 2013
9
0
10,510


I have reseated multiple times.I will try front panel reset switch.

Still, not working
 

avjguy2362

Honorable
Jun 21, 2012
732
0
11,360
What MB model, CPU, GPU, PS, do you have? DO all the other three LED post lights come on and then off. Each of the four lights is supposed to come on until the CPU, GPU RAM and HD is detected and then they go off. DO you have another PS? DO you have a volt/ohm meter. Can you check the CPU and GPU six pin plugs ( if you need them ) to verify 12 volts on the appropriate pins. Have you tried an alternate input on your monitor? HDMI, DVI or VGA?
 
Mine flashes red once on startup too, not sure what to do about it - I think I've been having some stability issues with mine (undervolted it by accident) resulting in occasional freezing. However i usually works just fine. I've just reseated mine and corrected the voltage, hopefully its all gravy. The PC is stable most of the time.

Anyone know what to do about the red dram_led flash?
 
Dec 18, 2021
1
0
10
Just fixed issue when powering on machine that would blink once dram led and then not power on at all by pressing the CPU 8-pin cable so that it would click.