Really need some help here

bradsctt

Distinguished
I would usually try and troubleshoot myself, but this morning im not really up to it.

Two days ago, my friend and i stayed up all night gaming, and most of the next day(yesterday). I had moved my pc to a different room as there wasn't enough space.

This morning, i have moved my pc back into my room, and reconnected everything properly.

However, when i turn it on, it powers on and doesnt do anything. The screen remains blank, flicking between inputs.

So i pulled out my anti static strap, and:

Removed the CMOS battery, in an attempt to reset it, i dont know if this worked or not though. I also dont know if my board is meant to have a light on it anywhere, but i cant see one when the PC is in standby/ turned on.

Reseated the GPU, and RAM.

I dont know if this is my GPU, or the rest of the system, as i havn't got a second system here to test components with. I only bought the GPU in September and the GPU, CPU and RAM at the start of November, so if its any of these, I will be annoyed.

I have tested the monitor with my laptop using the hdmi cable from my desktop, and its fine.

Specs are as in my profile.

Any help would be appreciated, as getting a tech company to look at this will cost a lot of money in my country.

 
Solution


Check the wiring, might have knocked a wire out of place, could be a damaged PSU, as they will boot some of the stuff but not have enough power for the rest of it. Try taking the GPU and use just one stick of RAM to start it and see if that helps too.

spat55

Distinguished


Check the wiring, might have knocked a wire out of place, could be a damaged PSU, as they will boot some of the stuff but not have enough power for the rest of it. Try taking the GPU and use just one stick of RAM to start it and see if that helps too.
 
Solution