I recently acquired some new hardware so I can build myself a new computer. I put everything together and did a dry run to make sure everything was getting power and it was. After this I went on to try and set up my computer but when I hooked up my computer to the monitor, it was giving me a "no signal detected" message on the screen. I know it's not a fault because everything is brand new. If anyone can help me out, that'd be great.
Specs:
Motherboard: ASUS Sabertooth 990FX R2.0
CPU: AMD FX-9590
GPU: AMD Radeon R9 290X (x2)
RAM: Kingston HyperX Beast 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400
SSD: 2x Samsung 840 PRO Series 512GB
Specs:
Motherboard: ASUS Sabertooth 990FX R2.0
CPU: AMD FX-9590
GPU: AMD Radeon R9 290X (x2)
RAM: Kingston HyperX Beast 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400
SSD: 2x Samsung 840 PRO Series 512GB