Hello, I have an ASUS z87-a mobo. After about 2 months of usage the board won't boot. I have tested all the other components separately and they all work fine, but the motherboard wont start. When I try to boot it, the fans spin up, the hard drive also spins but there is no POST signal what so ever. When I took the CPU off to get it ready for a return I saw that there are 2 or 3 slightly bent pins(they are all still aligned and all but just a little different from the others). Can this be a reason for an RMA to be refused(given that the signal can't even reach the CPU, no POST signals)?
Asus z87-a no POST, slightly bent pins, will they accept RMA
- Thread starter Ch1pStar
- Start date
apache_lives
Splendid
- Dec 10, 2002
- 6,873
- 1
- 26,160
generally bent pins = warranty void
regardless of the pins, lodge the rma as something like "intermittent post" or "crashes system" (always use intermittent in case it DOES work for them)
just make sure it is your motherboard and not something else
regardless of the pins, lodge the rma as something like "intermittent post" or "crashes system" (always use intermittent in case it DOES work for them)
just make sure it is your motherboard and not something else
TRENDING THREADS
-
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 58
Facebook
Twitter
Instagram