Sign in with
Sign up | Sign in
Your question
Solved

Built new pc, display says no signal

Last response: in Graphics & Displays
Share
January 2, 2014 2:49:55 PM

Hello, I've just recently build my new pc, I'm pretty sure all my parts are in it correctly (this is my first build) I try to boot the machine up, the fans and lights start and all but my monitor doesn't display anything just the words no signal. I'd appreciate if you guys could help me
Specs:
Cpu: amd a10 5800k
Mobo:MSI FM2-A75MA-E35 FM2 AMD A75
Psu: Corsair cx series CX430
Case: Nzxt source 210
Optical drive:ASUS DVD-Writer Black SATA Model DRW-24F1ST
Ram:G.SKILL Ripjaws Series 4GB 2x2 DDR3
I cant remember my hdd's name It's a WD 2 TB

More about : built display signal

January 2, 2014 2:56:42 PM

I can't help but laugh......but the mobo seems to be missing.....sorry about that....

You may need to switch the input on the monitor - they may be scanning the wrong input. There should be something on the front of the monitor to change the configuration.
m
0
l

Best solution

January 2, 2014 3:05:20 PM

This checklist was created for this type of problem. Perform all the steps in the checklist and let us know how it goes.
"No POST", "system won't boot", and "no video output" troubleshooting checklist
"No POST", "system won't boot", and "no video output" troubleshooting checklist This checklist is a compilation of troubleshooting ideas from many forum members. It's very important to actually perform every step in the checklist if you want to... See full content
Share
!